DFS60B-BGEM01024

HCM（YL）

DFS60B-BGEM01024

Delivery time：8-14 weeks

• Performance

  Pulses per revolution	1,024 1)
  Measuring step	90° electric/pulses per revolution
  Measuring step deviation at binary number of lines	± 0.008°
  Error limits	± 0.05°

  • 1) See maximum revolution range.

• Interfaces

  Communication interface	Incremental
  Communication Interface detail	HTL / Push pull
  Number of signal channels	6-channel
  Initialization time	40 ms
  Output frequency	≤ 600 kHz
  Load current	≤ 30 mA
  Power consumption	≤ 0.5 W (without load)

• Electrical data

  Connection type	Cable, 8-wire, universal, 5 m 1)
  Supply voltage	10 ... 32 V
  Reference signal, number	1
  Reference signal, position	90°, electric, logically gated with A and B
  Reverse polarity protection	✔
  Short-circuit protection of the outputs	✔ 2)
  MTTFd: mean time to dangerous failure	300 years (EN ISO 13849-1) 3)

  • 1) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.
  • 2) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
  • 3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

• Mechanical data

  Mechanical design	Blind hollow shaft
  Shaft diameter	14 mm
  Weight	+ 0.2 kg
  Shaft material	Stainless steel
  Flange material	Aluminum
  Housing material	Aluminum die cast
  Start up torque	0.8 Ncm (+20 °C)
  Operating torque	0.6 Ncm (+20 °C)
  Permissible movement static	± 0.3 mm (radial) ± 0.5 mm (axial)
  Permissible movement dynamic	± 0.2 mm (radial) ± 0.1 mm (axial)
  Operating speed	≤ 6,000 min⁻¹ 1)
  Moment of inertia of the rotor	40 gcm²
  Bearing lifetime	3.6 x 10^10 revolutions
  Angular acceleration	≤ 500,000 rad/s²

  • 1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.

• Ambient data

  EMC	According to EN 61000-6-2 and EN 61000-6-4
  Enclosure rating	IP67, housing side, cable connection (IEC 60529) IP65, shaft side (IEC 60529)
  Permissible relative humidity	90 % (Condensation not permitted)
  Operating temperature range	–40 °C ... +100 °C 1) –30 °C ... +100 °C 2)
  Storage temperature range	–40 °C ... +100 °C, without package
  Resistance to shocks	70 g, 6 ms (EN 60068-2-27)
  Resistance to vibration	30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)

  • 1) Stationary position of the cable.
  • 2) Flexible position of the cable.