HCM
FL SWITCH 1012NT-2SFP（1249598）
Delivery time：3-5 months
| width | 40 mm |
| height | 140.4 mm |
| depth | 92.4 mm |
| Restrictions on use | |
| EMC Considerations | EMC: Class A products, see manufacturer's description in Download Center |
| Housing material | Reinforced polycarbonate fiber |
| aluminum/steel DC01 |
| Mounting Type | DIN rail-mounted |
| Ethernet（RJ45） | |
| Number of interfaces | 12 |
| How to connect | RJ45 |
| Considerations for connection methods | Auto-negotiation and auto-intersection |
| Communication speed | 10/100 MBit/s |
| Means of transmission | Ethernet with RJ45 twisted pair |
| Transmission distance | 100 m (per segment) |
| Signal LEDs | Data Reception, Link State |
| Number of channels | 12 (RJ45 port) |
| Ethernet (SFP) | |
| Number of interfaces | 2 |
| How to connect | SFP |
| Communication speed | 100/1000 MBit/s (full duplex) |
| Means of transmission | Depends on SFP module |
| Transmission distance | Up to 40 km (depending on fiber/SFP module used) |
| Signal LEDs | Data Reception, Link State |
| Number of channels | 2 (SFP port) |
| Product Line | switch |
| Product Series | Unmanaged Switch 1000 |
| MTTF | 64.3 Years (MIL-HDBK-217F standard, 25°C temperature, 100% operating cycle) |
| 298.8 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) | |
| 560.1 Years (Telcordia standard, temperature 25°C, operating cycle 21% (5 days a week, 8 hours/day)) | |
| Switch function | |
| Basic Functions | Unmanaged Switches |
| Auto-negotiation | |
| Store-and-forward switching mode | |
| PROFINET conformity class | Conformance-Class A |
| MAC Address Table | 8k |
| Status and diagnostic display | LED： US, Link, Operation (Each Port) |
| Additional features | 100 BASE-TX/100BASE-FX (IEEE 802.3u) |
| Quality of Service (QoS) prioritization (IEEE 802.1p) | |
| Low Power Ethernet (IEEE 802.3az) | |
| 10Base-T (IEEE 802.3) | |
| Security Features | |
| Basic Functions | Unmanaged Switches |
| Auto-negotiation | |
| Store-and-forward switching mode | |
| Communication media | copper |
| power | |
| Power Supply (DC) | 24 V DC |
| Voltage range | 9 V DC ... 32 V DC |
| connection | Via COMBICON, conductor cross section up to 2.5 mm² |
| Residual ripple | 3.6 VPP (within allowable voltage range) |
| Maximum current consumption | 223 mA (approx. 9 V DC) |
| Normal current consumption | 125 mA (approx. 24 V DC) |
| How to connect | with leg spring connection |
| Single-wire connection size | 0.2 mm² ... 2.5 mm² |
| Conductor connection size/stranded wire | 0.2 mm² ... 2.5 mm² |
| Conductor cross-track size AWG | 24 ... 12 |
| Stranded connection cross section, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross-section/stranded wire, with rod terminals, without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Stripping length | 10 mm |
| Ambient conditions | |
| Degree of protection | IP30 |
| Operating ambient temperature | -40 °C ... 75 °C |
| Ambient temperature (storage/transportation) | -40 °C ... 85 °C |
| altitude | 2000 m (max) |
| Permissible humidity (operating) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/movement) | 5 % ... 95 % (non-condensing) |
| Impact (operating) | 30g (EN 60068-2-27) |
| Vibration (motion) | Conforms to IEC 60068-2-6: 5g, 150 Hz |
| Barometric pressure (operation) | 79 kPa ... 108 kPa Up to 2000 m above sea level (unrated) |
| Pressure (Storage/Move) | 79 kPa ... 108 kPa Up to 2000 m above sea level (unrated) |
| Conformance/Certification | |
| suitability | CE compliant |
| ATEX | II 3 G Ex ec IIC T4 Gc |
| EU Type Part Approval Number | UL 21 ATEX 2638X |
| IECEx | Ex ec IIC T4 Gc |
| IECEx Certificate | IECEx UL 21.0120X |
| UL, USA / Canada |
UL 61010-1, UL 61010-2-201 Class I, Div. 2, Groups A, B, C, D, T4 Class I, Zone 2, Group IIC, T4 |
