HCM
E6B2-CWZ5B 600 P/R 2M
Delivery time：1 week
| classification | Incremental type Shaft type | |
|---|---|---|
| diameter | φ40mm | |
| Power supply voltage | DC12~24V (-10%~+15%) Ripple (p-p) 5% or less | |
| Current consumption | 100mA or less | |
| resolution | 600P/R | |
| Inrush current | Approx. 9A (0.3ms) | |
| Output phase | A, B, Z phase | |
| Control output | Output format | PNP Open Collector |
| Applied voltage | DC30V or less | |
| Source current | 35mA or less | |
| Residual voltage | 0.4V or less (at 35mA source current) | |
| Origin Position Point | And | |
| Maximum response frequency | 50kHz | |
| Output phase contrast | Phase difference between A and B phases: 90±45°(1/4T±1/8T) | |
| Output rise and fall times | Less than 1μs (code length up to 2m, sink current 10mA) | |
| Starting torque | 0.98mN.m or less | |
| Moment of inertia | 3×10-7 kg.m2 or less | |
| Axial tolerance |
Radial: 30N Thrust: 20N |
|
| Maximum permissible speed | 6000r/min | |
| Protection circuit |
Load short circuit protection power reverse connection protection |
|
| Ambient temperature range |
When in use: -10~70°C (but not icing)When stored: -25~85°C (but not icing) |
|
| Ambient humidity range |
When in use: 35~85%RH (but not condensing)When stored: 35~85%RH (but not condensing) |
|
| Insulation resistance | Between live parts and case: 20 MΩ or more (at 500 VDC mega) | |
| Withstand voltage | Bundle between live parts and case: AC500V 50/60Hz 1min | |
| Vibration resistance | Endurance: 10~500Hz double amplitude 2mm or 150m/s2 X, Y, Z directions 3 times 11min | |
| Shockproof | Endurance: 1000m/s2 X, Y, Z 3 times in each direction | |
| Protective structure | IEC: IP50 | |
| Connection method | Cord drawer type (cord length: 2m) | |
| material |
Case: ABS Body: Aluminum Shaft: SUS420J2 |
|
| accessory | Instruction manual, coupling, hex spanner | |
