HCM
PVSE 400/24-10
Delivery time：1 week
| Input | |
|---|---|
| Input rated voltage | 3 x 400 - 500 Vac |
| Input voltage range | 340 - 550 Vac (480 - 780 Vdc) |
| Input rated current (rated load) | 0.6 A (3 x 340 Vac) |
| Rated frequency range | 44 Hz - 66 Hz / 0 Hz |
| Starting current limiter | <30 A, NTC |
| Input fuse internal | 3 x 1.6 A (slow-blow) |
| Recommended back-up fuse (circuit breaker) | 6 A, 10 A, 16 A, characteristics B, C |
| Harmonic correction | passive |
| Mains buffering (rated load) |
22.6 / 51.5 ms (400 / 500 Vac) |
| Transient surge voltage protection | Varistor |
| Output | |
|---|---|
| Output rated voltage | 24 Vdc |
| Output voltage range | 22.8 - 28.8 Vdc |
| Resistance to reverse feed max. | 35 Vdc |
| Output rated current | 10 A |
| Parallel connection | Yes |
| Power Boost | 20 A / 4 s (15 A / 8 s) |
| Overload behaviour | Constant current |
| max. Power loss idling/nominal load | 7.8 / 19.9 W |
| Serial operation | Yes |
| Efficiency | typ. 91.7 % |
| Ripple factor | typ. 70 mVss |
| Top Boost | 70 A / 50 ms |
| Signaling | |
|---|---|
| Power Good (DC OK) | LED green, LED red |
| Potential-free signal contact | Yes |
| Stand-by-input | Yes |
| Approvals | |
|---|---|
| Approvals | cURus, cULus |
| Environment | |
|---|---|
| Ambient temperature | -13 °F to 158° F |
| Storage temperature | -13 °F to +185 °F |
| Derating | -3 %/K > +122 °F |
| Safety and protection | |
|---|---|
| Protection index | IP 20 |
| Safety class | I, with PE connection |
| Terminal and mounting | |
|---|---|
| Terminals input, (spring clamp terminal, pluggable) | max. 2.5 mm² |
| Terminals output, (spring clamp terminal, pluggable) | max. 2.5 mm² |
| Terminals signalling, (spring clamp terminal, pluggable) | max. 0.5 mm² |
| Mounting position | vertical |
| Fixing method | DIN Rail system TS35 |
| Measures and weights | |
|---|---|
| Width | 2.24 inch |
| Height | 5.00 inch |
| Depth | 7.07 inch |
| Weight | 2.87 lbs |
| Accessory | |
|---|---|
| Connector for signalling | PV-CON (optional) |
| Side DIN rail mounting | PV-TS35M (optional) |
| Direct screw fastening plate for lateral mounting | PV-WB2 (optional) |
