HCM（ZQC）
LI1000P0-Q25LM0-ELIU5X3-H1151
Delivery time：4-5 months
Technical data Type LI1000P0-Q25LM0-ELIU5X3-H1151 ID 100001941 Measuring principle Inductive General data Measuring range 1000 mm Resolution 16 bit Nominal distance 1.5 mm Blind zone a 29 mm Blind zone b 29 mm Repeat accuracy ≤ 0.02 % of full scale Linearity deviation ≤ 0.035 % f.s.also under the influence of shock and vibration Temperature drift ≤ ± 0.003 %/K Hysteresis omitted as a matter of principle Electrical data Operating voltage 15…30 VDC Residual ripple ≤ 10 % Uss Isolation test voltage ≤ 0.5 kV Short-circuit protection yes Wire breakage/Reverse polarity protection yes / yes (voltage supply) Output function 5-pin, Analog output Voltage output 0…10 V Current output 4…20 mA Diagnostic Positioning element not within detection range: Output signal 24 mA or 11 V Load resistance voltage output ≥ 4.7 kΩ Load resistance current output ≤ 0.4 kΩ
Sample rate 5000 Hz Current consumption < 100 mA Mechanical data Design Profile, Q25L Dimensions 1058 x 35 x 25 mm Housing material Aluminum/plastic, PA6-GF30, Anodized Active area material Plastic, PA6-GF30 Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+70 °C Vibration resistance (EN 60068-2-6) 20 g; 1.25 h/axis; 3 axes Shock resistance (EN 60068-2-27) 200 g; 4 ms ½ sine Protection class IP66 IP67 MTTF 138 years acc. to SN 29500 (Ed. 99) 40 °C Power-on indication LED, Green Measuring range display multifunction LED, green, yellow, yellow flashing
