WL11G-2B2531

HCM

WL11G-2B2531

Delivery time：3 days

• Features

  Device type	Photoelectric sensors
  Dimensions (W x H x D)	15.6 mm x 48.5 mm x 42 mm
  Housing design (light emission)	Rectangular
  Sensing range max.	0 m ... 4 m 1)
  Sensing range	0 m ... 4 m 1)
  Focus	Approx. 1.5°
  Type of light	Visible red light
  Light source	LED 2)
  Light spot size (distance)	Ø 25 mm (1.5 m)
  Angle of dispersion	Approx. 1.5°
  Wave length	640 nm
  Adjustment	Potentiometer, 11 turns
  Special applications	Detecting transparent objects

  • 1) Reflector PL80A.
  • 2) Average service life: 100,000 h at TU = +25 °C.

• Mechanics/electronics

  Supply voltage	10 V DC ... 30 V DC 1)
  Ripple	< 5 Vpp 2)
  Current consumption	30 mA 3)
  Switching output	PNP 4) NPN 5)
  Switching mode	Light/dark switching 4) 5)
  Switching mode selector	Selectable via L/D control cable
  Signal voltage PNP HIGH/LOW	Uv - 3 V / approx. 0 V
  Signal voltage NPN HIGH/LOW	Approx. Uv / < 3 V
  Output current Imax.	≤ 100 mA
  Response time	≤ 330 µs 6)
  Switching frequency	1,500 Hz 7)
  Attenuation along light beam	> 8 %
  Connection type	Male connector M12, 5-pin
  Circuit protection	A 8) C 9) D 10)
  Protection class	II
  Weight	120 g
  Polarisation filter	✔
  Housing material	Plastic, ABS
  Optics material	Plastic, PMMA
  Enclosure rating	IP66 IP67 IP69K
  Special feature	Detecting transparent objects
  Ambient operating temperature	–30 °C ... +60 °C
  Ambient temperature, storage	–40 °C ... +75 °C
  UL File No.	NRKH.E181493 & NRKH7.E181493

  • 1) Limit values when operated in short-circuit protected network: max. 8 A.
  • 2) May not exceed or fall below Uv tolerances.
  • 3) Without load.
  • 4) 0 V or not connected, light switching.
  • 5) Uv, dark switching.
  • 6) Signal transit time with resistive load.
  • 7) With light/dark ratio 1:1.
  • 8) A = VS connections reverse-polarity protected.
  • 9) C = interference suppression.
  • 10) D = outputs overcurrent and short-circuit protected.