HCM（YL）
6SE7214-1AD23-0XB0
Delivery time：2-3 days
supply voltage
Rated value (DC)
● DC 24 V Yes
Load voltage L+
● Rated value (DC) 24 V
● Allowable range, lower limit (DC) 20.4 V
● Allowable range, upper limit (DC) 28.8 V
Input current
Turn on the current, with a maximum value of 12 A; At 28.8 V
From the power supply voltage L+, * * * with a maximum value of 700 mA; 110 mA to 700 mA, 660 mA for expansion component output current (5 V DC)
Sensor power supply
24 V sensor supply
● 24 V Yes; Allowable range: 15.4 to 28.8 V
● Short circuit protection Yes; Electronic at 280 mA
● Output current, * * * maximum 280 mA
Power loss
Power loss, typical value 7 W
storage
Number of memory modules (optional) 1; A pluggable memory module with the same content as the integrated EEPROM. It can also store recipes, data records, and other files by category.
Working memory
● Integration (for programs) 12 kbyte; 8 KB when runtime editing is activated
● Integration (for data) 8 kbyte
buffer
● Existence Yes; Program: The entire program is located in the integrated EEPROM, maintenance free, and can be programmed through the CPU; Data: The entire DB 1 downloaded from PG/PC is located in the integrated EEPROM and is maintenance free. The real-time values of DB 1 are located in RAM, and the remaining tags, timers, counters, etc. are maintenance free through * * capacitors; Optional battery for long buffer
Battery
Buffer battery
● Buffer time, * * * with a maximum of 100 h; (at least 70 hours at 40 ° C); 200 days (typical) with optional battery modules
CPU processing time
For bit operations, the * * * large value is 0.22 µ s
Counters, timers, and their remanence
S7 counter
● Quantity 256
remanence
- adjustable Yes; About * * capacitors or batteries
- Lower limit 1
- Upper limit 256
Counting range
- Lower limit 0
- Upper limit 32 767
S7 time
● Quantity 256
remanence
- adjustable Yes; About * * capacitors or batteries
- Upper limit 64
time frame
- Lower limit 1 ms
- Upper limit 54 min; 4 timers: 1 ms to 30 s; 16 timers: 10 ms to 5 min; 236 timers: 100 ms to 54 min
Data range and its remanence
sign
● Capacity, * * * max 32 bytes
● Presence of residual magnetism Yes; M 0.0 to M 31.7
● Keep 0 to 255 with batteries, adjustable for * * capacitors or batteries
● Keep 0 to 112 in the EEPROM without batteries, adjustable
Hardware expansion
Number of expansion brackets, * * * maximum 7; Only S7-22x series expansion modules can be used. Due to limited output current, the use of expansion modules may be limited.
Connectable programming device/PC SIMATIC PG/PC, standard PC
Expansion module
● Analog input/output terminal, * * * large value 35*** Large 28 inputs and 7 outputs (EM) or * * * Large 0 inputs and 14 outputs (EM)
● Digital input/output terminal, * * * large value 168*** 94 more inputs and 74 outputs (CPU+EM)
● AS interface input/output terminal, * * * large value 62; AS interface A/B slave station (CP 243-2)
Digital input
Number of digital inputs 14
Source type input/drain type input Yes; Optional, each group
input voltage
● Rated value (DC) 24 V
● 0 to 5 V for signal "0"
● For signal "1" * * *, the minimum value is 15 V
Input current
● Typical value of 2.5 mA for signal "1"
Input delay (when the input voltage is rated)
For standard inputs
- Parameterizable Yes; whole
- From "0" to "1", * * * has a small value of 0.2 ms
- From "0" to "1", * * * has a maximum value of 12.8 ms
For alarm inputs
- Parameterizable Yes; E 0.0 to E 0.3
For technical functions
- Parameterizable Yes; (E 0.0 to E 1.5) 30 kHz
Wire length
● Shielding, * * * with a maximum of 500 m; Standard entrance: 500 m, fast counter: 50 m
● Unshielded, * * * with a maximum of 300 m; Not used for high-speed signals
Digital output
Number of digital outputs 10; transistor
Short circuit protection or not; External Presets
Limit of inductive switching off voltage 1 W
Making and breaking capacity of output terminal
● Maximum value of 0.75 A under resistive load
● Maximum value of 5 W at lighting load
output voltage
● For signal "1", * * * small value DC 20 V
Output current
● Rated value of 750 mA for signal "1"
● For the residual current of signal "0", the maximum value of * * * is 10 µ A
Output delay under resistive load
● From "0" to "1", * * * has a maximum value of 15 µ s; Standard output, * * * large values (A 0.2 to A 1.1) 2 µ s; Pulse output, * * * maximum (A 0.0 to A 0.1) 2 µ s
● From "1" to "0", * * * has a maximum value of 130 µ s; Standard output, * * * large values (A 0.2 to A 1.1) 10 µ s; Pulse output, * * * maximum (A 0.0 to A 0.1) 10 µ s
Two outputs in parallel
● Used to increase power Yes
switching frequency
● Pulse output terminal of resistive load, with a maximum value of 20 kHz; A 0.0 to A 0.1
Total current at the output (per group)
All installation locations
- * * * Up to 40 ℃, * * * Maximum 6 A
Horizontal installation position
- * * * Up to 55 ℃, * * * Maximum 6 A
Relay output terminal
● Number of relay outputs 0
Wire length
● Shielding, * * * max 500 m
● Unshielded, * * * max 150 m
Analog Input
Number of analog potentiometers 2; Analog potentiometer; Resolution 8 bits
sensor
Connectable sensor
● Two wire sensor Yes
- Allowable closed circuit current (dual wire sensor) * * * Maximum 1 mA
1. Interface
Interface type Integrated RS 485 interface
agreement
● MPI Yes; As an MPI slave station, it is used for data exchange with the MPI master station (S7-300/S7-400-CPU, OP, TD, push button panel); The internal CPU/CPU communication of S7-200 may be limited in the MPI network; Transmission rate 19.2/187.5 kbit/s
● PPI Yes; PPI protocol is attached for programming functions, HMI functions (TD 200, OP), and internal CPU/CPU communication of S7200; Transmission rate 9.6/19.2/187.5 kbit/s
● Serial data exchange Yes; As a freely programmable interface, external devices with ASCII protocol baud rate are used for serial data exchange: 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2 kbps; PC/PPI cables can also be used as RS 232/RS 485 converters
MPI
● Transmission rate, * * * minimum 19.2 kbit/s
● Transmission rate, * * * with a maximum of 187.5 kbit/s
Integrated functionality
Number of alarm inputs 4; 4 rising pulses and/or 4 falling pulses
The number of pulse output terminals 2; Fast output terminal, 20 kHz, with possibility of interruption; Pulse wavelength and frequency can be modulated
Limit frequency (pulse) 20 kHz
Potential isolation
Digital input potential isolation
● Between channels is
● Between channels, group points 6 and 8
Digital output potential isolation
● Yes between channels; Photocoupler
● Between channels, the number of grouping points is 5
Allowable potential difference
Between different circuits DC 500 V between DC 24 V and DC 5 V
Protection level and protection category
Protection grade IP IP20
Environmental requirements
Ambient temperature during operation
● Horizontal installation, * * * minimum value 0 ° C
● Horizontal installation, * * * maximum 55 ° C
● Vertical installation, * * * minimum value 0 ° C
● Vertical installation, * * * maximum 45 ° C
Air pressure meets the requirements of IEC 60068-2-13 standard
● Allowable range, lower limit 860 hPa
● Allowable range, upper limit 1 080 hPa
Relative air humidity
● Operation, * * * small value 5%
● Operation, * * * maximum 95%; RH stress intensity 2 in accordance with IEC 1131-2
Project Configuration/Title
Project Configuration/Programming/Title
● Operate standby devices for binary operations, comparison operations, time operations, count operations, clock operations, transmission operations, table operations, logic operations, movement and rotation operations, conversion operations, program control operations, interrupt and communication operations, stack operations, fixed point operations, floating point operations, and digital functions
● Program editing free cycle (OB 1), alarm control, time control (1 to 255 ms)
● Program organization 1 OB, 1 DB, 1 SDB subroutines with/without parameter transmission
● Number of subprograms, * * * large value 64
programming language
- KOP Yes
- FUP is
- AWL is
Technical protection
● User program protection/password protection Yes; Level 3 password protection
Connection Technology/Title
Pluggable I/O terminals are
size
Width 120.5 mm
Height 80 mm
Depth 62 mm
