ZXG
2904601
Delivery date: spot
| Control input (configurable) Rem | Output Power ON/OFF (SLEEP MODE) |
| Default (value) | Output power ON (>40 kΩ/24 V DC/Rem and SGnd open bridging) |
| AC operation | |
| Network type | Star Network |
| Rated input voltage range | 100 V AC... 240 V AC |
| Input voltage range | 100 V AC... 240 V AC -15 % ... +10 % |
| Lower the rating | < 100 V AC (1 %/V) |
| Maximum dielectric strength | 300 V AC 60 s |
| Typical voltage of the national grid | 120 V AC |
| 230 V AC | |
| The voltage type of the supply voltage | AND |
| Surge current | Typical 12 A at 25 °C |
| Inrush current integration (I2t) | < 0.7 A2s |
| Surge current limit | 12 A (1 ms后) |
| AC frequency range | 50 Hz ... 60 Hz -10 % ... +10 % |
| Frequency range (fN) | 50 Hz ... 60 Hz -10 % ... +10 % |
| 16.7 Hz (according to EN 50163) | |
| Grid buffer time | 42 ms typical (120 V AC) |
| 44 ms typical (230 V AC) | |
| Power consumption | 3.4 A (100 V AC) |
| 2.8 A (120 V AC) | |
| 1.5 A (230 V AC) | |
| 1.5 A (240 V AC) | |
| Rated power consumption | 274 VA |
| Protection circuits | transient surge protection; Varistors, gas discharge tubes |
| Power factor (COS phi) | 0.94 |
| Absorption time | < 1 s |
| Typical response time | 300 ms (from SLEEP MODE) |
| Input fuse | 8 A (slow fusing, internal) |
| Recommended input protection circuit breakers | 10 A ... 16 A (characteristics B, C, D, K or similar) |
| PE discharge current | < 3.5 mA |
| 0.7 mA (264 V AC，60 Hz) | |
| Direct current operation | |
| Rated input voltage range | 110 V DC ... 250 V DC |
| Input voltage range | 110 V DC ... 250 V DC -18 % ... +40 % |
| Lower the rating | < 110 V DC (1 %/v) |
| The voltage type of the supply voltage | DC |
| Power consumption | 3 A (110 V DC) |
| 1.3 A (250 V DC) | |
| efficiency | typical 92.5 % (120 V AC) |
| typical 93.4 % (230 V AC) | |
| Output characteristics | U/I Advanced |
| Smart HICCUP | |
| FUSE MODE | |
| Rated output voltage | 24 V DC |
| Output voltage (USet) setting scope | 24 V DC ... 29.5 V DC (constant capacity) |
| Rated output current (IN） | 10 A |
| Static Boost (IStat.Boost) | 12.5 A |
| Dynamic Boost (IDyn.Boost) | 20 A (5 s) |
| Selective fusing (ISFB) | 60 A (15 ms) |
| Thermomagnetic circuit breaker type | A1... A6 / B2... B6 / C1... C3 / Z1... Z6 |
| attenuation | > 60 °C ... 70 °C (2.5 % / K) |
| Feedback voltage resistance | ≤ 35 V DC |
| Overvoltage Protection (OVP) at Output | ≤ 32 V DC |
| Control deviations | < 0.5 % (static load change 10% ... 90%) |
| < 4 % (dynamic load change 10% ... 90%，(10 Hz)) | |
| < 0.25 % (input voltage varies from ±10 %) | |
| Residual waves | < 80 mVSS (Rating) |
| Short-circuit protection | be |
| Air defense turns | be |
| Output power | 240 watts (Printing) |
| 300 watts (Printing) | |
| 480 watts (Printing) | |
| Apparent power | 336 AND (120 V,UOUT = 24 V,IOUT = static margin) |
| 345 AND (230 V,UOUT = 24 V,IOUT = static margin) | |
| Maximum idle power consumption | < 3 W (120 V AC) |
| < 3 W (230 V AC) | |
| Maximum rated load power loss | < 20 W (120 V AC) |
| < 17 W (230 V AC) | |
| POWER CONSUMPTION SLEEP MODE | < 3 W (120 V AC) |
| < 3 W (230 V AC) | |
| Amplitude factor | Typical 1.50 (120 V AC) |
| Typical 1.67 (230 V AC) | |
| Rise time | < 1 s (UOut = 10 % ... 90 %) |
| Parallel connected | Yes, for redundancy and increased capacity |
| Concatenated | be |
| Signal | |
| The signal is ground SGnd | Reference potentials for Out1, Out2, and Rem |
| Signal Out 1 (configurable) | |
| Digital quantities | 24 V DC 20 mA |
| Default (value) | 24 V DC 20 mA 24 V DC,针对UOut > 0.9 x USet |
| Signal Out 2 (configurable) | |
| Digital quantities | 24 V DC 20 mA |
| mock | 4 mA ... 20 mA ±5 % (load ≤400 Ω) |
| Default (value) | 24 V DC 20 mA 24 V DC,针对POut < PN |
| Signal relay 13/14 (configurable) | |
| Default (value) | Close (Uout > 0.9 USet） |
| Digital quantities | 24 V DC 1 A |
| 30 V AC/DC 0.5 A | |
