Тройник Тр-Rс1/2 УХЛ4 Ст.20
-
Соединение HCB14-Rс1/2 УХЛ4 Ст.20 ТУ36-1104-82
Соединение HCB14-G1/2 УХЛ4 Ст.20 ТУ36-1104-82
Соединение НСН14хМ20 УХЛ4 Ст.20 ТУ36-1104-82
Термоусаживающая манжета ТИАЛ-МГП-426.350.1,8 ТУ 2293-005-58210788-2013
Тройник фланцевый с пожарной подставкой Ø150 ГОСТ 5525-88
Пожарная подставка раструбная Ø150 ГОСТ 5525-88
Патрубак фланец-гладкий конец Ø150 ГОСТ 5525-88
Гидрант пожарный Н=1250мм ГОСТ 8220-856
Люк чугунный ЛВ ГОСТ 3634
Изоляция труб ПВХ
Ковер с поливочным краном шрина(Ø)-260 мм Высота- 240 мм Вес (кг) - 7,7
Люк чугунный ЛВ ГОСТ 3634-89
Вентиль пожарный 161р Ø50 ТУ 26-07-225-78
Головка рукавная ГР-50 ГОСТ 28352-89
Головка муфтовая ГМ-50 ГОСТ 28352-89
Ствол пож.ручной РС-50 ГОСТ 9923-80Е
Рукав льнуной Ø50 ГОСТ 472-75
Головка цапковая ГЦ-50 ГОСТ 28352-89
Смеситель См-Д-Ст ГОСТ 19874-74
Гидрант пожарный Н=1250мм ГОСТ 8280-85Е
Тройник фланцевый с пожарной подставкой 150*150 ГОСТ 5525-88
Пожарная подставка раструбная Ø150 ГОСТ 5525-88
Компрессор Q=0,5 м3/млн Ру=0,5 Мпа Р=4 КвТ ТУ22-4680-80
Рукава пожарно-напорные льняные Ру 1,2 Мпа Ду 50 ГОСТ 472-75
Головка соединительная рукавная Ру 1,2МПа Ду50 ГОСТ 28352-89
Головка соединительная муфтовая Ру 1,2МПа Ду50 ГОСТ 2217-76
Ствол пожарный ручной Ру 0,6 Ду 50 ГОСТ 9923-80Е
Металлорукав из стальной оцинкованной ленты с хлопчатобумажным уплотнением Ду-15 мм ТУ22-2173-71
Отборное устроиство 3R4-27410-90
Соединитель нипельный с торцевым уплотнением ТУ36-1104-82Е
Коробка соединительная ТУ36-2568-83
Соединение СШТ-14
Танк-фертилизер TCT 2-DF
Электро радиатор серии Opera, N=2,0 кВт Фирма "ENSTO" (Финляндия) Opera 2000
Узел прохода с клапаном с ручным управлением с кольцом для сбора конденсата УП2-11 УП1-02 Сер. 5.904-45
Воздухавод из тонколистовой стали по б=0,6мм Ø200 TDS 14918-80
Воздухавод из листавой стали оцинкованный толщ.0,6мм Ø315 TDS 14918-80
Зонт Ø200 УП1-02 Сер. 5.904-51
Наконечник капельного орошения (капельница) с регулятором давления 8л/ч модель #01WPCJ4 TDS 17375-2001
Адаптор PVC 50х21/2" (муфта комбинированная с наружной резьбой 21/2"- раструбом под трубу 50мм) PN10
Адаптор PVC 40х21/2" (муфта комбинированная с наружной резьбой 21/2"- раструбом под трубу 40мм) PN10
Адаптор PVC 32х21/2" (муфта комбинированная с наружной резьбой 21/2"- раструбом под трубу 32мм) PN10
Адаптор PVC 25х21/2" (муфта комбинированная с наружной резьбой 21/2"- раструбом под трубу 25мм) PN10
Проходная изолирующая втулка ПВХ, с резиновым кольцом Ø16 PN10
Втулка ПЭ 90Т TS01577687-04-2007
Втулка ПЭ 75Т TS01577687-04-2007
Втулка ПЭ 63Т TS01577687-04-2007
Втулка ПЭ 50Т TS01577687-04-2007
Втулка ПЭ 40Т TS01577687-04-2007
Втулка ПЭ 32Т TS01577687-04-2007
Втулка ПЭ 25Т TS01577687-04-2007
Люк чугунный тип "ТВ" TDS 3634-89
Трап Ø100 TDS 1811-81
Труба канализационная ТКР-ПНД-100-1 TDS 22689.2-89
Головка цапковая соединительная ГЦ-50 TDS 2217-76
Шкаф для хранения хозинвентаря 450х500х2000 Инд. ОН-7-742/4
Стул жесткий 450х450х770
Труба БНТ 100 TDS 1839-80
Металлорукав РЗ-Ц-Х-Ш-12У1 ТУ 22-5570-83
Эмаль ПФ-115 ГОСТ 6465-76
Защитная лента полимерная (PHW) ГОСТ 9.602-2016
Обвертка защитная ГОСТ 9.602-2016
Отборное устройство давления 16-200П ЗК4-274.10-90
Защитная коробка для приборов из бронированного полиэстера 450х450х450мм AFSK
Вставка диэлектрическая Ду7мм, L=240мм ВДГ-1
Вставка диэлектрическая М20х1,5МхМ20х1,5F SS-8-DE-6
Тройник Тр-Rc1/2"
Ввод кабельный 1/2" NPT HIMEL
Заглушка 1/2" NPTM COMPAX
Соединитель с наружной резьбой 1/2"ODх1/2"NPTM 768LSS HAMLET
Штуцер 1/2"х1/2" NPTM
Муфта 1/2" NPTM
Лоток перфорированный ЛП85 У1 L=2000мм ТУ 36-1113-84
Соединение НСН14-М20 УХЛ4 ТУ 36-1104-82
Соединение навертное НСН14-М20 УХЛ4 ТУ 36-1104-82
Соединение НСВ14-G1/2 УХЛ4 ТУ 36-1104-82
Соединение НСВ14-Rc1/2 УХЛ4 ТУ 36-1104-82
Соединение НСВ14-Rc1/2 УХЛ4 ТУ 36-1104-82
Соединение НСВ14-M20 ТУ 36-1104-82
Тройник Тр-Rc1/2 УХЛ4 ТУ 36-1116-83
Скоба СО14У2 ТУ36.22.19.06-001-87
Скоба СО10У2 ТУ36.22.19.06-001-87
Сальник 16 У2 ТУ36.22.19.06-001-86
Рентген пленка 30*40
Blowout Preventer (BOP) 20¾″ × 3000 PSI Complete assembly with upper spool, double ram preventer and cross connections
Blowout Preventer (BOP) 13⅝″ × 10000 PSI Complete set with shear ram, choke/kill manifold, remote control unit & auxiliary panel
Wellhead Christmas Tree OKK2-35×168×245×324 API 6A compliant
Wellhead Christmas Tree OKK2-70×168×245×324 API 6A compliant
Casing Shoe Ø324 mm ND 351 mm API RP 10F III-C
Casing Shoe Ø245 mm ND 270 mm API RP 10F III-C
Casing Shoe Ø168 mm ND 188 mm API RP 10F III-C
Non-Return Valve ЦКОД-324-2 ND 351 mm API RP 10F III-C compliant
Non-Return Valve ЦКОД-245-2 ND 270 mm API RP 10F III-C compliant
Non-Return Valve ЦКОД-168-1 ND 188 mm Gas-tight, premium class
PVC Film (Black) Width 2.5 m; Thickness ≥ 1.5 mm; Density 1.8 kg/m²
Prefabricated Modular Storage Unit L = 8 m; W = 5 m; H = 3.5 m; side panel height 1.5 m
Tricone Drill Bit Ø508 mm (IADC 123) ISO 10424-1 compliant
Tricone Drill Bit Ø393.7 mm (IADC 114) ISO 10424-1 compliant
Tricone Drill Bit Ø393.7 mm (IADC 137) ISO 10424-1 compliant
Tricone Drill Bit Ø393.7 mm (IADC 121) ISO 10424-1 compliant
Tricone Drill Bit Ø393.7 mm (IADC 115) ISO 10424-1 compliant
Tricone Drill Bit Ø295.3 mm (IADC 437) ISO 10424-1 compliant
Tricone Drill Bit Ø295.3 mm (IADC 517) ISO 10424-1 compliant
Tricone Drill Bit Ø295.3 mm (IADC 134) ISO 10424-1 compliant
Tricone Drill Bit Ø295.3 mm (IADC 137) ISO 10424-1 compliant
Tricone Drill Bit Ø215.9 mm (IADC 547) ISO 10424-1 compliant
Tricone Drill Bit Ø215.9 mm (IADC 136) ISO 10424-1 compliant
Steel Wire Rope Ø32 mm (6×31 WS + FC, galvanized) API Spec 9A compliant
Core Barrel Tool “Security DBS” Ø121×67 NC-38 API standard
Core Barrel Tool “Security DBS” Ø171×102 NC-50 API standard
Mechanical Packer (including anchor) Ø236–700 mm API 11D1 standard
Auxiliary Tool – Hook (Lifting Type) Lifting capacity 5 t; Breaking load 25 t; Weight 1.95 kg
Steel Pipe Blank Ø451×0.28 Material L-80 steel; Length 10 000 mm
Steel Pipe Blank Ø365×0.25 Material L-80 steel
Steel Pipe Blank Ø351×0.25 Material L-80 steel
Steel Pipe Blank Ø277×0.25 Material L-80 steel
Steel Pipe Blank Ø269×0.26 Material L-80 steel
Steel Pipe Blank Ø196×0.28 Material L-80 steel
Hydraulic Planetary Motor MГП-80 Displacement 80 cm³/rev; Cylindrical shaft
Hydraulic Planetary Motor MГП-100 Displacement 100 cm³/rev; Cylindrical shaft
Hydraulic Planetary Motor MГП-125 Displacement 125 cm³/rev; Cylindrical shaft
Mobile Pump Station CHM-D/16/21 Motor 10.5 kW; Flow 30 L/min; Pressure 21 MPa; Tank 12 L
3D VR Training Simulator (VARWIN or equivalent) Virtual-reality training system for oilfield operations (hardware + software set)
Reusable Gas-Tight Protective Suit – Dräger “WorkStar”, Dräger CPS 6800 Type 1b or equivalent Gas-tight reusable protective suit, EN 943-1 / EN 943-2 Type 1b; protects against toxic gases, vapors, and liquid chemicals; includes integrated gloves and boots; reusable version for industrial emergency response
Men’s Acid-Resistant Protective Suit (complete set: jacket, trousers, mittens, cap) GOST 27652-88; made of acid- and alkali-resistant rubberized or PVC-coated fabric; provides protection from inorganic acids and alkalis
Flame-Resistant Suit (two-piece: jacket and trousers) EN 533; TU 8572-017-00302190-93; flame-retardant cotton or aramid material for protection against open flames and heat
Rubber Safety Boots (PVC, MBS, KShS type with steel toe cap) GOST 5375-79; oil-, fuel- and alkali-resistant; antistatic sole; with reinforced steel toe cap
Rubber Boots (PVC, anti-slip tread) GOST 5375-79; waterproof PVC boots with non-slip sole for slippery and wet environments
Noise Reduction Earmuffs Noise attenuation 31 dB (SNR); GOST 12.4.208-99 / EN 352; adjustable headband, soft sealing cushions
Reusable Ear Plugs Noise attenuation 31 dB (SNR); GOST 12.4.208-99 / EN 352-2; reusable silicone or PU foam earplugs with cord
Open-Type Safety Glasses (UV Protection) For protection against ultraviolet radiation and flying fine particles; GOST 12.4.013-97 / EN 170
Open-Type Transparent Safety Glasses For protection from chemical and mechanical hazards; GOST R 12.4.013-97
Safety Glasses for Gas Welders Protects eyes from optical radiation of welding arc and mechanical impact; GOST R 12.4.013-97
Protective Welding Mask For electric welding works; GOST 12.4.035-78; shade level 9–11 DIN filter; adjustable head strap
Full-Face Panoramic Respirator Mask with Filters for Organic, Inorganic, and Acid Gases/Vapors 3M 6800 Series Mask; filters 6057 (6003), pre-filters 5911, holders 501 or equivalent; protection up to 200 MPC; GOST 12.4.189-99
Full-Face Respirator Mask with Filters for Chlorine Protection 3M 6800 Series Mask; filters 6096 (6009), pre-filters 5911, holders 501 or equivalent; protection up to 100 MPC; GOST 12.4.189-99
Anti-Aerosol Respirator 3M 9925 or equivalent For welding aerosols; protection class FFP2 up to 12 MPC; GOST 12.4.191-99
Anti-Aerosol Respirator 3M 9926R FFP2 with Exhalation Valve or equivalent Protection against sulfur dioxide (SO₂) and acid dust; class FFP2 up to 12 MPC; GOST 12.4.191-99 / EN 149
Anti-Aerosol Respirator 3M or equivalent (for cement and fertilizer dust) Protection against mineral dust and cement dust; class FFP2 up to 12 MPC; GOST 12.4.191-99
Mobile Compressed Air Source – Dräger PAS Air Pack 1 Complete set with two 12 L compressed air cylinders; working pressure 300 bar; includes hoses and regulators
Self-Contained Breathing Apparatus (SCBA) – Dräger PSS 4000 Full set including: Dräger PSS 4000 with gauge (order code 3363988); lung automaton PSS-A (code 3338700); holder A (code 3357527); FPS 7000 mask (R56200); 6.8 L composite cylinder with valve; GOST 12.4.189-99
Dräger Cooling Vest – Dräger Comfort Vest CVP 5220 PCM Element Order code R45104 (vest), R53373 (carrying bag), R58764/R58763 (sizes); personal cooling garment for use under protective clothing
Breathing Apparatus Testing Equipment – Dräger Quaestor 8000 Standard Standard configuration, order code R63200; for testing and calibration of SCBA sets; includes software and accessories
Full Body Safety Harness with Shoulder and Thigh Straps and Lanyard GOST R 12.4.224-99; full-body type harness with anchorage lanyard; fall-arrest design; adjustable polyester webbing
Lineman’s Safety Belt with Nylon Straps (PM-N or equivalent) GOST R 12.4.184-95; equipped with snap hooks; designed for pole or tower climbing
Rubberized Apron GOST 12.029-76; chemical-resistant rubberized fabric; adjustable neck and waist straps
Dielectric Mat GOST 4997-75; insulating mat for electrical work; thickness 6 mm; rated voltage up to 1000 V
Latex Dielectric Gloves (Seamless) GOST 12.4.103-83; for electrical protection up to 1000 V; seamless natural latex
Dielectric Boots GOST 13385-78; electrical insulation footwear; rated up to 1000 V
Tonometer with Stethoscope (Mechanical Type) Mechanical sphygmomanometer; includes stethoscope; for emergency and medical use
Lineman’s Climbing Spurs (Climbing Claws) – KLM-№1 GOST standard; steel body with adjustable leather straps; used for pole climbing
One-Sided Lead Apron for Radiation Protection ONIKO “FO” heavy Pb 0.5; size 60×110 cm; TU U 33.1-19242964-002-2001
Lead Protective Mittens ONIKO TU U 33.1-19242964-002-2001 Pb 0.5; used for X-ray and radiation protection
Lead Protective Shoe Covers (Boot Covers) ONIKO 19242964.002РЭ; for radiation protection use
Portable Single-Gas Analyzer – for Hydrogen Sulfide (H₂S) Measures H₂S concentration; GOST 12.2.007.0-75 / GOST R 51330.10-99 / IEC 60079-11:98; ATEX II 1G EEx ia IIC T4; includes calibration accessories and gases
Portable Dual-Gas Analyzer – for Methane (CH₄) and Hydrogen Sulfide (H₂S) GOST 12.2.007.0-75 / GOST R 51330.10-99 / IEC 60079-11:98; ATEX II 1G EEx ia IIC T4; complete with calibration gas and accessories
Portable Multi-Gas Analyzer – for CH₄, O₂, CO, H₂S GOST 12.2.007.0-75 / GOST R 51330.10-99 / IEC 60079-11:98; ATEX II 1G EEx ia IIC T4; complete calibration set and gas cylinders
Single-Gas Analyzer SEWERIN VARIOTEC-480 EX GOST R 51330.0-99; ATEX certified gas detector for explosive environments
Dräger Short-Term Gas Detection Tubes – Oxygen 5%/B Order code 67 28 081; for measuring O₂ concentration; short-term measurement system
Dräger Short-Term Gas Detection Tubes – Hydrogen Sulfide 1/c Order code 67 19 001; for measuring H₂S; range 1–200 ppm
Dräger Short-Term Gas Detection Tubes – Carbon Monoxide 8/a Order code CH 19 701; for measuring CO; range 5–300 ppm
Portable Grounding Device (110/35 kV) GOST standard; for temporary grounding during maintenance of electrical lines; rated for 110/35 kV
Fire Hose Assembly (Pressure Type) with Couplings – Indoor Use For internal hydrants; inner Ø51±1 mm; working pressure 1.0 MPa; burst pressure 3.5 MPa; length 20±1 m; GOST R 51049-2008
Fire Hose Assembly (Pressure Type) with Couplings – Outdoor Use For outdoor hydrants; inner Ø51±1 mm; pressure 1.0 MPa; burst 3.5 MPa; 20±1 m; GOST R 51049-2008
Fire Hose Assembly (Pressure Type, T/I/M – Heat, Wear, Oil Resistant) For fire trucks; Ø51±1 mm; working pressure 1.6 MPa; burst 4.0 MPa; 20±1 m; GOST R 51049-2008
Fire Hose Assembly (T/I Type – Heat & Wear Resistant) For outdoor hydrants; Ø66±1 mm; working pressure 1.6 MPa; burst 4.0 MPa; length 20±1 m; GOST R 51049-2008
Fire Hose Assembly (T/I/M Type – Heat, Wear & Oil Resistant) For fire trucks; Ø77±1 mm; working pressure 1.6 MPa; burst 4.0 MPa; 20±1 m; GOST R 51049-2008
Suction and Delivery Fire Hose with Couplings For suction and discharge of water and foam concentrate; Ø77±1 mm; working pressure 1.6 MPa; burst 4.0 MPa; length 4 m; GOST R 51049-2008
Dry Chemical Fire-Extinguishing Powder “VEXON – ABC 25” or equivalent GOST R 53280.4-2009 / TU 2149-086-10968286-2000 (Amend. 1); multipurpose powder for Class A, B, C, E fires
Firefighter Combat Suit (for Command Staff) BOP type; TU-8027-004-31094986-01; thermal-protective multilayer construction, flame-retardant fabric
Firefighter Helmet with Balaclava KP-92 or equivalent; GOST R 53269-2019; heat-resistant composite shell, visor, neck protection
Mobile Foam Extinguishing Unit PY-200 or equivalent Foam tank 200 L; working pressure 1.2 MPa; discharge 4–8 L/s; complete with nozzle and hose reel
Portable Rechargeable Lamp “FOS-3-5/6” Explosion-proof LED lamp with charger; IP-65 or higher
Dielectric Kit for Fire Truck Equipment Includes: dielectric gloves (GOST 12.4.183-91), boots (GOST 13385-78), mat (GOST 4997-75), and shears; for live-voltage work safety
Rescue Rope VPS-50 GOST R 53266-2009; Ø 12 mm × 50 m; static type; certified for human lifting/lowering
Rescue Rope VPS-30 GOST R 53266-2009; Ø 12 mm × 30 m; static; load capacity ≥ 1500 kg
Fire Extinguisher OP-100 (3) ABC E or equivalent GOST R 51057-2001; 100 kg wheeled dry-powder type
Fire Extinguisher OP-50 or equivalent GOST R 51057-2001; 50 kg wheeled dry-powder
Fire Extinguisher OP-25 or equivalent GOST R 51057-2001; 25 kg trolley type
Fire Extinguisher OP-10 ABC E or equivalent GOST R 51057-2001; 10 kg portable dry-powder
Fire Extinguisher OP-8 or equivalent GOST R 51057-2001; 8 kg portable
Fire Extinguisher OP-6 or equivalent GOST R 51057-2001; 6 kg portable
Fire Extinguisher OP-5 ABC E or equivalent GOST R 51057-2001; 5 kg portable
Fire Extinguisher OP-4 or equivalent GOST R 51057-2001; 4 kg portable
Fire Extinguisher OP-3 or equivalent GOST R 51057-2001; 3 kg portable
Fire Extinguisher OP-2 or equivalent GOST R 51057-2001; 2 kg portable
CO₂ Fire Extinguisher OU-35 or equivalent GOST R 51057-2001; 35 kg wheeled CO₂ unit
CO₂ Fire Extinguisher OU-5 or equivalent GOST R 51057-2001; 5 kg portable CO₂
CO₂ Fire Extinguisher OU-4 or equivalent GOST R 51057-2001; 4 kg portable CO₂
Fire Blanket (Wool or Fiberglass) Size 1.5 × 2 m; GOST R 50982-96; non-flammable material for smothering flames
Portable Fire Pump MP-16/80 “Vodoley” or equivalent GOST R 53332-2009; capacity 1600 L/min; head 80 m; engine-driven, self-priming
Combined Hand Fire Nozzle RSPK-50 GOST 9923-93; adjustable jet/spray modes; flow ≥ 5 L/s; connection DN-50
Hand Fire Nozzle RS-80 GOST 9923-93; straight-stream type; connection DN-80; brass or aluminum alloy
Tee fitting Tr-Rc ½ inch, Climate UHL4, Steel 20 TU 36-1104-82
Coupling HCB14-Rc ½ inch, Steel 20 TU 36-1104-82
Coupling HCB14-G ½ inch, Steel 20 TU 36-1104-82
Coupling HCN14-M20, Steel 20 TU 36-1104-82
Heat-shrink sleeve TIAL-MGP-426.350 × 1.8 mm TU 2293-005-58210788-2013
Flanged tee with fire stand Ø150 mm GOST 5525-88
Bell-mouth fire stand Ø150 mm GOST 5525-88
Pipe section with flange – plain end Ø150 mm GOST 5525-88
Fire hydrant H = 1250 mm GOST 8220-85
Cast-iron manhole cover Type LV GOST 3634-89
PVC pipe insulation —
Floor cover with water tap Ø260 mm × 240 mm height, 7.7 kg weight —
Cast-iron manhole cover Type LV GOST 3634-89
Fire valve 161r Ø50 mm TU 26-07-225-78
Fire hose coupling GR-50 Ø50 mm GOST 28352-89
Threaded hose coupling GM-50 Ø50 mm GOST 28352-89
Fire nozzle RS-50 manual Ø50 mm GOST 9923-80 E
Linen fire hose Ø50 mm GOST 472-75
Male coupling GC-50 Ø50 mm GOST 28352-89
Mixer SM-D-St type for water system GOST 19874-74
Fire hydrant H = 1250 mm GOST 8280-85 E
Flanged tee with fire stand 150 × 150 mm GOST 5525-88
Bell-mouth fire stand Ø150 mm GOST 5525-88
Compressor Q = 0.5 m³/min, P = 0.5 MPa, 4 kW TU 22-4680-80
Fire-pressure linen hose PN 1.2 MPa, DN 50 mm GOST 472-75
Hose coupling PN 1.2 MPa DN 50 mm GOST 28352-89
Threaded coupling PN 1.2 MPa DN 50 mm GOST 2217-76
Fire-fighting manual nozzle PN 0.6 MPa DN 50 mm GOST 9923-80 E
Metal hose from galvanized steel strip with cotton seal DN 15 mm TU 22-2173-71
Sampling device 3R4-27410-90 TU 3R4-27410-90
Nipple connector with end seal TU 36-1104-82
Junction box TU 36-2568-83
Connection fitting SHT-14 —
Tank-fertilizer unit TCT 2-DF —
Electric radiator Opera series, power 2 kW, brand ENSTO (Finland) Model Opera 2000
Wall passage unit with manual valve and condensate collection ring UP2-11 / UP1-02 Series 5.904-45
Air duct made of thin sheet steel (0.6 mm thickness) Ø200 mm TDS 14918-80
Air duct galvanized sheet steel (0.6 mm thickness) Ø315 mm TDS 14918-80
Air cap Ø200 mm UP1-02 Series 5.904-51
Drip irrigation nozzle with pressure regulator 8 L/h, Model #01WPCJ4 TDS 17375-2001
PVC Adaptor 50 × 2½” (combined socket male thread 2½” × pipe socket 50 mm) PN 10 —
PVC Adaptor 40 × 2½” (combined socket male thread 2½” × pipe socket 40 mm) PN 10 —
PVC Adaptor 32 × 2½” (combined socket male thread 2½” × pipe socket 32 mm) PN 10 —
PVC Adaptor 25 × 2½” (combined socket male thread 2½” × pipe socket 25 mm) PN 10 —
Through PVC insulating bushing with rubber ring Ø16 mm PN 10 —
PE Bushing Ø90 mm TTS 01577687-04-2007
PE Bushing Ø75 mm TTS 01577687-04-2007
PE Bushing Ø63 mm TTS 01577687-04-2007
PE Bushing Ø50 mm TTS 01577687-04-2007
PE Bushing Ø40 mm TTS 01577687-04-2007
PE Bushing Ø32 mm TTS 01577687-04-2007
PE Bushing Ø25 mm TTS 01577687-04-2007
Cast-iron manhole cover type “TV” TDS 3634-89
Drain trap Ø100 mm TDS 1811-81
Sewer pipe TKR-PND-100-1 TDS 22689.2-89
Male coupling GC-50 TDS 2217-76
Storage cabinet for cleaning equipment 450×500×2000 mm Model ON-7-742/4
Rigid chair 450×450×770 mm —
Pipe BNT 100 TDS 1839-80
Metal hose RZ-C-H-Sh-12 U1 TU 22-5570-83
Enamel paint PF-115 GOST 6465-76
Protective polymer tape (PHW type) GOST 9.602-2016
Protective wrapping (polymer) GOST 9.602-2016
Pressure sampling device 16-200 PZK4-274.10-90 TU 274.10-90
Protective instrument box (reinforced polyester), 450×450×450 mm Type AFSK
Dielectric insert DN 7 mm, length 240 mm VDG-1
Dielectric insert M20×1.5 (male × female) FSS-8-DE-6
Tee fitting Tr-Rc ½” —
Cable gland ½” NPT (HIMEL type) —
Plug ½” NPTM (COMPAX type) —
Male connector ½” OD × ½” NPTM 768LSS HAMLET
Nipple ½” × ½” NPTM —
Coupling ½” NPTM —
Perforated cable tray LP85 U1, L=2000 mm TU 36-1113-84
Connector NSN14-M20 UHL4 TU 36-1104-82
Threaded connector NSN14-M20 UHL4 TU 36-1104-82
Connector NSV14-G½ UHL4 TU 36-1104-82
Connector NSV14-Rc½ UHL4 TU 36-1104-82
Connector NSV14-Rc½ UHL4 TU 36-1104-82
Connector NSV14-M20 TU 36-1104-82
Tee Tr-Rc½ UHL4 TU 36-1116-83
Clamp CO14U2 TU 36.22.19.06-001-87
Clamp CO10U2 TU 36.22.19.06-001-87
Gland 16 U2 TU 36.22.19.06-001-86
X-ray film 30×40 cm —
Fixer (developer solution, 5-liter canister) —
Developer (5-liter canister) —
Intensifying screen —
Film “POLYKEN” Film “POLYKEN 2036-25” or equivalent
Wrapping “POLYKEN” Wrapping “POLYKEN 2055-25” or equivalent
Primer “POLYKEN” Primer “POLYKEN 1019 S” or equivalent
Heat-shrink sleeve TIAl-M Ø1220 mm According to inquiry sheet
Heat-shrink sleeve TIAl-M Ø1020 mm According to inquiry sheet
Heat-shrink sleeve TIAl-M Ø530 mm According to inquiry sheet
Heat-shrink sleeve TIAl-MPG Ø1020 × 350 × 2.8 mm According to inquiry sheet
Heat-shrink sleeve TIAl-MPG Ø426 × 350 × 1.8 mm According to inquiry sheet
Heat-shrink sleeve TIAl-MPG Ø325 × 350 × 1.8 mm According to inquiry sheet
Heat-shrink sleeve TIAl-MPG Ø159 × 300 × 1.4 mm According to inquiry sheet
Universal welder’s template UShS-3 —
Paint, yellow PF-115 GOST 6465-76
Paint, red PF-115 GOST 6465-76
Gas cylinder 50 L Gas cylinder 50 L KY-43 15860-84, Liquefied gas EDS-20448-90
Ball Valve Assembly (KShZ Series) TU 3661-051-27005283-98; Body: Steel 38KhM (GOST 4543-71); Corrosion- and H₂S-resistant execution (K2).
KShZ-152×70 (K2) Nominal bore 198 mm; height 390 mm; connection thread Z-152; max working pressure 700 atm; H₂S-resistant.
KShZ-147×70 (K2) Nominal bore 178 mm; connection thread Z-147; max working pressure 700 atm; H₂S-resistant.
KShZ-133×70 (K2) Nominal bore 165 mm; connection thread Z-133; max working pressure 700 atm; H₂S-resistant.
KShZ-102×70 (K2) Nominal bore 127 mm; connection thread Z-102; max working pressure 700 atm; H₂S-resistant.
KShN-127×70 (K2) Nominal bore 141 mm; connection thread NKT-127; max working pressure 700 atm; H₂S-resistant.
KShN-89×70 (K2) Nominal bore 108 mm; connection thread NKT-89; max working pressure 700 atm; H₂S-resistant.
Drill String Ball Check Valve (KOBSh Type) OST 39-096-79 / GOST 28487-90; H₂S-resistant execution; rated pressure 70 MPa.
KOBSh 165 / Z-133×70 Outer diameter 165 mm; connection thread Z-133; max pressure 70 MPa; H₂S-resistant.
KOBSh 203 / Z-152×70 Outer diameter 203 mm; connection thread Z-152; max pressure 70 MPa; H₂S-resistant.
Bottomhole Milling Tools (FZ and “Barracuda” Series) OST 26-02-233-70; heavy-duty milling cutters for casing/fishing operations.
FZ-140 Ø 140 mm; right-hand connection Z-102.
FZ-140 L Ø 140 mm; left-hand connection Z-102.
FZ-150 Ø 150 mm; right-hand connection Z-102.
FZ-150 L Ø 150 mm; left-hand connection Z-102.
FZ-190 Ø 190 mm; right-hand connection Z-117.
FZ-190 L Ø 190 mm; left-hand connection Z-117.
FZ-210 Ø 210 mm; right-hand connection Z-133.
FZ-210 L Ø 210 mm; left-hand connection Z-133.
“Barracuda” 210 mm (Right) Right-hand connection Z-133.
“Barracuda” 210 mm (Left) Left-hand connection Z-133.
“Barracuda” 300 mm (Right) Right-hand connection Z-152.
“Barracuda” 300 mm (Left) Left-hand connection Z-152.
“Barracuda” 150 mm (Right) Right-hand thread connection.
“Barracuda” 150 mm (Left) Left-hand thread connection.
Pilot Mill (2FP Type) OST 26-16-1623-82; for pilot holes and casing windows.
2FP-205 Outer Ø 205 mm; pilot Ø 80 mm; right-hand connection Z-117.
2FP-140 Outer Ø 140 mm; pilot Ø 57 mm; right-hand connection Z-88.
Casing Cone Mills (FKK Type) OST 26-02-650-72; conical mills; cone angle 30°.
FKK-115 Max Ø 115 mm; right-hand connection Z-88.
FKK-127 Max Ø 127 mm; right-hand connection Z-88.
FKK-141 Max Ø 141 mm; right-hand connection Z-102.
Annular Mills (FK Type) OST 26-02-1296-75; ring-type mills for clean-out.
3FK 210 / 179 (Right) Outer Ø 210 mm; inner Ø 179 mm; right-hand connection.
3FK L 210 / 179 (Left) Outer Ø 210 mm; inner Ø 179 mm; left-hand connection.
Reamer Mills (RPM Type) TU 26-16-76-78; TU 26-16-149-83; TU 89-01-595-80; for casing windows.
RPM-168 For casing window; nominal Ø 168 mm; right-hand connection Z-102.
Reamer Mills (FRL Type) For milling windows in casing pipes (FRL series).
FRL-136 For casing windows Ø 140 mm; right-hand connection Z-102.
Magnetic Fishing Mills with Mechanical Gripper (FMZ Type) Combined magnetic + mechanical capture system.
FMZ 140 Outer Ø 140 mm; mechanical grip 2 kN; magnetic force 4.5 kN; thread Z-88.
FMZ 210 Outer Ø 210 mm; mechanical grip 3 kN; magnetic force 8.5 kN; thread Z-117.
FMZ 270 Outer Ø 270 mm; mechanical grip 5.5 kN; magnetic force 10 kN; thread Z-147.
Overshot “Bell” Type (K Series) OST 26-02-1275-75; fishing bells for catching broken pipe ends.
K 85-64/102 (Right) Max/min fishing thread Ø 85/64 mm; right-hand Z-88.
K 85-64/102 (Left) Max/min fishing thread Ø 85/64 mm; left-hand Z-88.
K 100-78/122 (Right) Max/min Ø 100/78 mm; right-hand Z-102.
K 100-78/122 (Left) Max/min Ø 100/78 mm; left-hand Z-102.
K 110-70/122 (Right) Max/min Ø 110/70 mm; right-hand Z-88.
Internal Catch Fishing Tools for UBT Type (LTV2-UBT) For internal pipe recovery in drill collars; L/R threads.
LTV2-UBT-146 (L) Catching range Ø 69–85 mm; left-hand Z-121.
LTV2-UBT-146 (R) Catching range Ø 69–85 mm; right-hand Z-121.
LTV2-UBT-178 (L) Catching range Ø 76–91.5 mm; left-hand Z-147.
LTV2-UBT-178 (R) Catching range Ø 76–91.5 mm; right-hand Z-147.
LTV2-UBT-203 (L) Catching range Ø 76–104 mm; left-hand Z-171.
LTV2-UBT-203 (R) Catching range Ø 76–104 mm; right-hand Z-171.
External Catch Fishing Tools (LTN Type) Spiral & collet capture type (LTN).
LTN 95/79 Spiral Ø 79 mm; collet Ø 66.5 mm; right-hand Z-76.
LTN 175/128 Spiral Ø 128 mm; collet Ø 119 mm; right-hand Z-140.
LTN 197/160 Spiral Ø 160 mm; collet Ø 143 mm; right-hand Z-147.
Universal Fishing Taps (MBU Type) OST 26-02-1273-75 / OST 26-02-1274-75; for threading onto broken pipe ends.
MBU 74-120 (R) Min fishing thread Ø 74 mm; max thread Ø 120 mm; right-hand Z-133.
MBU 74-120 (L) Min fishing thread Ø 74 mm; max thread Ø 120 mm; left-hand Z-133.
Fishing Tap (MEU Type) GOST 8483-81; universal tap for threading onto broken/damaged pipe ends.
MEU 46-80 L Min fishing thread Ø 46 mm; max Ø 80 mm; left-hand thread.
Fishing Tap (MSZ Type) OST 26-02-1274-75 / OST 26-02-1273-75; for Z-102 locking threads.
MSZ-102 (R) For right-hand locking thread Z-102.
MSZ-102 (L) For left-hand locking thread Z-102.
Fishing Tap (MES Type) – Tubing Couplings Ø 89 mm (NKT) OST 26-02-1274-75 / OST 26-02-1273-75.
MES-89 (R) For screwing into tubing coupling Ø 89 mm (right-hand).
MES-89 (L) For screwing into tubing coupling Ø 89 mm (left-hand).
Fishing Tap (MES Type) – Tubing Couplings Ø 127 mm (NKT) OST 26-02-1274-75 / OST 26-02-1273-75.
MES-127 (R) For screwing into tubing coupling Ø 127 mm (right-hand).
MES-127 (L) For screwing into tubing coupling Ø 127 mm (left-hand).
Mechanical Lower Packers (Type 4 PNM) Mechanical packers for zonal isolation; ΔP rated 70 MPa.
PNM-140 Outer Ø 140 mm; working pressure 70 MPa.
PNM-150 Outer Ø 150 mm; working pressure 70 MPa.
PNM-220 Outer Ø 220 mm; working pressure 70 MPa.
Surfacing (Welding) Rods for Tool Restoration For restoration of drilling/fishing tools.
Composite Surfacing Rods (Fine) Diameter 1.6–3.2 mm.
Composite Surfacing Rods (Medium) Diameter 3.2–4.8 mm.
Composite Surfacing Rods (Coarse) Diameter 4.8–8.0 mm.
Brass (Brazing) Rods
Borax (Flux)
Copper-Nickel Brazing Rods For base-metal surface preparation.
Welding Flux For cleaning/preparing base-metal surfaces.
Drill Bits ISO 10424-1 / IADC classification — Tricone & PDC.
Ø 660.4 mm IADC 115 SB115C
Ø 444.5 mm IADC 115 XR+VC
Ø 444.5 mm PDC SD1 519
Ø 444.5 mm IADC 135 GGH+C
Ø 311.1 mm IADC 117 XR+VC
Ø 311.15 mm PDC M1 616
Ø 215.9 mm IADC 117 XR+
Ø 215.9 mm PDC MDi 613
Ø 215.9 mm IADC 537 GF20PS
Ø 393.7 mm IADC 114 / 137
Ø 215.9 mm IADC 136 / 214 / 547 / 627
Wellhead and Casing Head Assemblies Complete wellhead + casing head; models OKK3-168×245×324-700 K2; AFK-100×700 K2.
Wellhead Assembly with Casing Head Model OKK3-168×245×324-700 K2 + AFK-100×700 K2 (or equivalent).
Guide Shoes for Casing Strings OST 26-02-227-71 / OST 39-011-87 series; API/BAM TOP/OTTM threads.
BP-340 or equivalent Nominal Ø 365 mm; thread BAM TOP.
BP-251 or equivalent Nominal Ø 270 mm; thread BAM TOP.
BP-178 or equivalent Nominal Ø 198 mm; thread BAM TOP.
BP-324 or equivalent Nominal Ø 351 mm; thread OTTM or equivalent.
BP-245 or equivalent Nominal Ø 270 mm; thread BATRESS or equivalent (ANI).
BP-168 or equivalent Nominal Ø 188 mm; thread VAM or equivalent (ANI).
Check Valves TU 39-01-08-282-77 / TU 39-013-86; well check valves for casing strings.
CKOD-340-2 or equivalent Nominal Ø 365 mm; thread BAM TOP.
CKOD-251-2 or equivalent Nominal Ø 270 mm; thread BAM TOP.
CKOD-178-1 or equivalent Nominal Ø 198 mm; thread BAM TOP.
CKOD-324-2 or equivalent Nominal Ø 351 mm; thread OTTM or equivalent.
CKOD-245-2 or equivalent Nominal Ø 270 mm; thread BATRESS or equivalent (ANI).
CKOD-168-1 or equivalent Nominal Ø 188 mm; thread VAM or equivalent (ANI).
Stage Cementing Collars (MSC Type) TU 39-860-83 / TU 39-961-83; stage cementing during casing installation.
MSC 2-340 Connection: BAM TOP; nominal Ø 340 mm.
MSC 1-245 Connection: BAM TOP; nominal Ø 245 mm.
MSC 1-178 Connection: BAM TOP; nominal Ø 178 mm.
Cementing Plugs (PP Type) TU 39-01-268-86 / TU 39-208-76; upper & lower rubber-core plugs.
PP 324×351 Plug set for casing Ø 324 mm.
PP 219×245 For casing Ø 219–245 mm.
PP 146×168 For casing Ø 146–168 mm.
Drilling Elevators (KM Type) TU 26-02-933 series; slip-type elevators, straight seat.
KM 89-200 For drill pipes Ø 89 mm; rated 200 t.
KM 127-250 For drill pipes Ø 127 mm; rated 250 t.
KM 140-320 For drill pipes Ø 140 mm; rated 320 t.
Steel Wire Ropes GOST 16853-88 / ANSI API Spec 9A; 6×31 S-1WRC (LK-RO).
Ø 32 mm (LK-RO 6×31 S-1WRC) Ungalvanized rope for drilling hoists.
Ø 38.1 mm (LK-RO 6×31 S-1WRC) Ungalvanized rope; API Spec 9A equivalent.
Pipe and Blind Rams for BOP – Cameron 180×700 Model 7 1/16 SINGLE; for Ø73, Ø89, Ø101, Ø114, Ø127 mm; complete set 3 of each size.
Hydraulic Drive Unit for Wellhead BOP Alignment (UN PVO) OVCh-274 E-01 or equivalent; hydraulic cylinder stroke ≥ 2 m; load ≥ 8 t; pipe gripping 0–250 mm.
Polyvinyl Chloride (PVC) Film (Black) Width 2.5 m; Length 25 m; Thickness > 1.5 mm; Density 1.8 kg/m².
Elevators (EK Type) TU 26-02-945-82; for drill & casing pipes; straight seat.
EK-102 NP-200 For drill pipes Ø102 mm; load 200 t.
EK-127 NP-250 For drill pipes Ø127 mm; load 250 t.
EK-140-320 For drill pipes Ø140 mm; load 320 t.
EK-273-170 For casing pipes Ø273 mm; load 170 t.
EK-407-170 For casing pipes Ø407 mm; load 170 t.
Steel Wire Rope Ø32 mm (LK-RO, ungalvanized) GOST 16853-88 / ANSI API Spec 9A; 6×31 WS-IWRC.
Steel Wire Rope Ø38 mm (6×31 WS-IWRC, ungalvanized) ANSI/API Spec 9A; hoisting rope for rigs and well-servicing.
Piston Ø135; 3.5H8 For AVSh 6/10 compressor unit, Stage II.
Power Ring (Piston Ring) AVSh 3.7/200M — 391.169.01.204 (size 3.5) For AVSh 6/10 compressor unit, Stage II.
Lubrication Ring AVSh 3.7/200M — 391.169.01.203 (size 5) For AVSh 6/10 compressor unit, Stage II.
Cylinder Block, Stage II Ø135 H7 For AVSh 6/10 compressor unit, Stage II.
Gear Rim / Flexible Coupling ROTEX 75 (KTR) For Atlas Copco GA 132 FF.
Hose — 1622 3154 WK 429127 For Atlas Copco GA 75.
Drain Valve — 2901 0563 00 For Atlas Copco GA 132 FF.
Drain Valve — 2901 0563 00 For Atlas Copco GA 75.
Air Pressure Regulating Valve Atlas Copco 0301, 110V 50 Hz, 4 W; Pmax 232 PSI; Ø8 mm, 3/2, MH10753.
Refrigerant Condensate Drain Valve Atlas Copco EWD32 — X4008915X090204 / 1617478000, 1–60°C, 0.8–16 bar, 12–230 psi.
Refrigerant Condensate Drain Valve (GA 132 FF) Atlas Copco 0330 B2.0 NBR VA G1/4 PN 0–16 bar 230V 50–60Hz 8W.
Silencer for Air Drying For Atlas Copco GA 75 — ATOMUFFLER 44AW56 MODEL 15.
Filter Element — WSD-750 (PN 1613946380) PS 16 bar, Max temp 70°C, v8.61.
Air Hose — 0575 0125 08 (P/N) 35 bar, W16/09 OLNH, DN 16, B 241.
Oil Hose — GONTI-TCH-OLNS-1-6×3 >AEM/AEM<42/08–32 0574 9917-14 W48/08 B024 CH SB.
Shaft Seal — 1621 4840 00 s 0900213.004 BATCH1 LOT NR.14500.
Air Compressor Bearing — SKF 2208 E C Germany 026F EXPLORER.
Air Compressor Shaft Bearing — SKF 3315 A/C3 USA 10 198E EXPLORER.
Air–Oil Hose — 013B 1623 0807 00 P/N 35 bar, 130°C, S DN 85 W20/09.
Drain Valve — Atlas Copco EWD 330 8102041947 08–16 bar 12–230 psig 1613881001 230V 50–60Hz 2VA.
Valve Pneumatic Actuator Type UT20-0CAD31 6bar 60Nm CH.17 NAMUR H=30.
Filter Elements – Atlas Copco Set PD310+ (1624 1832 01), DD310+ (1624 1832 02), QD310+ (1624 1832 03).
Membrane Gas Separation Module (MBA-1.4-95.0-500) Part numbers: 14J0073905–14J0071805.
Filter Element — FA600IG Max 17.2 bar; Temp range corrected to Max 80°C / Min −15°C.
Oil and Air/Fuel Filters XAVS-307 Cd — Set of oil, air, and fuel filters for compressor unit.
Air Screw Compressor GA-75 (A,B) Complete screw-type air compressor assembly (Atlas Copco GA 75 A/B series).
Oil Filter — Atlas Copco (GA 75) 1622 3142 00 / 90526 GENUINE PARTS.
Oxygen Analyzer Sensor For nitrogen compressor G-160 — Model HY2C OXYGEN SENSOR.
Solenoid Valve for Air Pressure Regulation Burkert PN 0–16 bar 24V 50Hz 8W CE 00126155 W7ZAM.
Flow Meter — GVF100 For Atlas Copco G-160, 150°C, 5000 Nm³/h, CN-2202341 GAIMC.
Surge Protector with Bulkhead Mounting IS-B50HN-C2-MA, per Specification Sheet No.10.
PTFE Rod for Pressure Regulator PTFE F4 Rod, Diameter 60 mm, Length 1000 mm, per Inquiry Sheets No.14.1–14.4.
PTFE Rod PTFE F4 Rod, Diameter 80 mm, Length 1000 mm.
PTFE Rod PTFE F4 Rod, Diameter 100 mm, Length 1000 mm.
PTFE Sheet (20 mm thickness) PTFE Sheet 1000 × 1700 mm, Thickness 20 mm.
Filter Element (for Air Compressor G-18) Atlas Copco 1629 3150 04 4 G/S.
Filter Element (for Air Compressor G-18) Atlas Copco 1629 3150 24 4 C/D.
Filter Element (for Air Compressor G-18) WS 040.
Paper Air Filter (for Compressor G-18) GENUINE PART Atlas Copco 1092 2002 83.
Oil Filter (for Compressor G-18) Atlas Copco GENUINE PART 1092 9001 46, Max Pressure 15 bar.
Oil Filter (for Compressor G-18) Atlas Copco ORIGINAL PART 1092 2034 06, Max pressure 14 bar, Max temp 120°C, Volume 2.01L.
Oil Separator (for Compressor G-18) Atlas Copco 1092 9039 34-01239.
Drive Belt (for Compressor G-18) Atlas Copco 1092 2029 91, Complete set of belts.
Air Valve (for Compressor G-18) Atlas Copco 1622 8786 88 / 61574-22ED;01.
Mechanical Condensate Drain Valve (for Compressor G-18) WBK20B, Pmax 20bar, Tmax 100°C, 1/2'' OUT.
Moisture Separator for Compressor G-18 (Carbon Type) Activated carbon filter media for moisture removal.
Moisture Separator for Compressor G-18 (Alumagel Type) Desiccant type Alumagel 3.2mm for air drying systems.
Filter Element Atlas Copco 1612 4188 203 DD/DD P360.
Filter Element Atlas Copco 1612 4188 201 PD/PD P360.
Filter Element (for Nitrogen Compressor G-160) Atlas Copco Genuine Part 1635 0406 00.
Filter Element Atlas Copco 1624 1882 02 QD360.
Oil Filter (for Compressor G-160) Atlas Copco Original Part 1621 7378 00, Max Pressure 20 bar.
Air Pressure Sensor (for Compressor G-160) Atlas Copco 1089 9625 13, Range 1–17 bar.
Gear Reducer Model 4655A-2-32-40-0.3.
Rotor Assembly (STD-12500) STD-12500-2 7TD/201 Rotor 8250.
Gas Sampling Container As per Inquiry Sheet No. 17.
