| Item No. | Description of Items | Part no./Drawing code | Unit |
| Lot-1 : Spare parts for DW, RT, HPU, Pneumatic system & others | |||
| A. Spares for Draw works Model:JC50DB | |||
| 2 | Rope retainer/kick back roller | DSQ-01.00 | pcs |
| 3 | Hydraulic pump for DW disk brake with 3 kW, 50 Hz, 380V, Type-YB2-100L2-4W three phase induction motor | (Rexroth) A10VSO 10DR/52R- PPA14N00, MNR: R910990406, Vg=10.5cm3,1500rpm, 250bar | Set |
| B. Spare for ZB045.00 RT DRIVE | |||
| 1 | Clutch set | LT500/250T | set |
| 2 | air release valve | KPJ-L10 | pcs |
| C. Spare Parts for Main Hydraulic Power Unit (HPU)- [Honghua YZ1000F-093] | |||
| 1 | Hydraulic pump with 75 KW, 380/660 V, Type-YB2-280S-4 three phase induction motor set | Pump Model-SYA10VS0100DFLR/31R-SSA12, Max 28MPa | Set |
| 2 | Hydraulic pump with three phase induction motor set 1.1 KW Type YB3-90S-4, 380V, 50Hz | Pump- CM: G2050-139, 2.5 MPa,1450rpm | Set |
| 3 | EP electromagnetic change air valve (Festo) | MFH-3-1/4-24VDC-EEX-M | pcs |
| D. Spare Parts for Pneumatic system | |||
| 1 | Air winch (10KN, 20.6 Kw, 0.8MPa) for derrick/monkey board with wire dia 12mm, 60m long | JQH-10x24/ equivalent | Set |
| 2 | Air valve model: 4A430C-15 pressure: 0.15-0.8MPa | pcs | |
| 3 | Air valve model: 3A220-06 pressure: 0.15-0.8MPa | pcs | |
| 4 | Air valve model: 4A210-06 pressure: 0.15-0.8MPa | pcs | |
| 5 | Sullair Air Dryer set, inlet & outlet dia 2-3", 400V, 3P, 50Hz, Air Presuure 90-230 psig | Model: RC-850-400-3-50-A/equivalent | set |
| 6 | Air source triple coupling，Festo | FRC-1/2-D-MIDI-A-NPT | pcs |
| E. Miscellenious | |||
| 1 | Hydraulic Jack min.100 Ton capacity, body width apprx. 9", max. height 12", plunger max. dia 4" (for rig centering purpose) | Enerpac | set |
| 2 | Explosion proof rectangular metal Diesel storage tank (more than 10,000 liter capacity with min. 1.5 meter stand, mesauring scale, in & out lines fitted with ball valves) | submit photo/drawing | set |
| Lot-2 : Spare parts for mud circulating system | |||
| A. Spare Parts for Charging Pump XBSY SB 6x8-J 12½ (55kw) | |||
| 1 | Pump XBSY SB 6x8-J 12 ½ coupled with motor 55kw | Set | |
| 2 | Impeller-J 12.5" of XBSY SB 6x8-J 12 ½ pump | pcs | |
| 4 | Cover of seal of above XBSY pump | pcs | |
| 5 | Pin and sheath loop of above XBSY pump | pcs | |
| B. Spare Parts for Sand Pump, XBSY SB 6x8 FJC 12- ½ (55kw) | |||
| 1 | Pump XBSY SB 6x8 FJC 12 ½ coupled with motor 55kw | Set | |
| 2 | Impeller-J 12.5" of above mentioned pump | pcs | |
| C. Spare Parts for Sand Pump XBSY, SB 5x6 JC 12 ½ (45kw) | |||
| 1 | Pump XBSY SB 5x6 JC 12 ½ coupled with motor 45kw | set | |
| 3 | Impeller-J 12.5" of above mentioned pump | pcs | |
| D. Spare Parts for Sand Pump XBSY, SB2x3 JC -10 (11KW) | |||
| 1 | Pump XBSY SB 2x3 JC-10 coupled with motor 11kw | set | |
| E. Spare parts for high pr. Manifold & stand pipe | |||
| 1 | O- ring for 4” hammer union Fig.1002 | pcs | |
| 2 | Rubber hose -4”, 4.5M long, 35MPa/5000psi, male-female hammer union 4″Fig1003, API spec 7K | pcs | |
| 3 | O- ring for 4” hammer union Fig.1003 | ||
| 4 | Rotary hose 4" with male female hammer union connections, 23.5m, 35MPa, Fig.1002, API spec 7K | 4″, 23.5m, 35MPa, Fig.1002 | pcs |
| 5 | Gasket ring for flange 4 1/16", fig 1003 | R24 | pcs |
| 6 | Gasket ring | R39 | pcs |
| 7 | Mud hose 5000psi, 7.5M, API 7K, 2" Fig 1502 male female union | pcs | |
| G. Spare parts for solid control system | |||
| 1 | Butterfly valve- 8" wafer type (outer dia 17", medium pressure, API standard) | pcs | |
| 2 | Butterfly valve- 10" wafer type (outer dia 17", medium pressure, API standard) | pcs | |
| 3 | Butterfly valve- 12" wafer type (outer dia 17", medium pressure, API standard) | pcs | |
| 5 | LT Lugged Butterfly Valve DN150/PN1.0 | D7L1X3-10ZB1 | pcs |
| 6 | LT Lugged Butterfly Valve DN200/PN1.0 | D7L1X3-10ZB1 | pcs |
| 7 | LT Lugged Butterfly Valve DN250/PN1.0 | D7L1X3-10ZB1 | pcs |
| 8 | Steel armoured compensator/ expansion joint 6" | pcs | |
| 9 | Steel armoured compensator/ expansion joint 8" | pcs | |
