CV006

CV010

CV015

CV025

CV050

Caliber

10mm或1/2″

15mm或1/2″

15mm或1/2″

25mm或1″

40mm或1.1/2″

50mm或2″

Important part
material

Wetted Department

SUS316L

Shell body

SUS304

Connection specifications

JIS 10、20、30K、ANSI/JPI 150、300RF、Hygienic connection

Applicable fluid

liquid

Density range

0.3~2.0g/ml

temperature
range

Construction stop

Integrated shape: -25 ~ + 125 ℃ Separated shape: -40 ~ + 125 ℃

Explosion proof

Maximum working pressure

The connection pressure below 7.9Mpa (normal temperature), the rated pressure and the temperature and pressure are determined by the ratio

Inflow method

Positive direction only

Explosion-proof structure

Subject to the parameters of the transformation section

MODEL

EV9111

EV9201

may
range

Temperature

-20~+125℃（防爆型也同样）

一体形 ：-25~+125℃分离型：-40~+125℃ 

防爆型：-20~+125℃

Power supply

20~30VDC

85~264VAC(50/60Hz)或20~30VDC

Power consumption

Max.6VA

Max.25VA

Ambient temperature

-20~+55℃

-20~+55℃

Transmission distance (separate type)

____________

Max.5m(Use special cable)

Explosion-proof structure

Combination explosion-proof (Exd[ib]ⅡBT3)

Combination explosion-proof (Exd[ib]ⅡBT3)

Container protection level

IP66（耐尘  耐水型）IEC60529,EN60529,JIS C 0920

IP65

Installation

One-piece

Integrated or separate

monitor

LCD monitor（7段8位）

LCD monitor（7段码8位）

Quality

约1.6kg

约4.6kg（分离型约5.8kg）

way of communication

Bell202

Bell202

Status input

无

Remote zero point or select function / contact input (a contact)

Pulse output

Choose one from ①②③ below
① Voltage pulse output [0]: below 1V; [1]: 15V
②Maximum 30V pulse output of open collector circuit, 50mAPC
③ Analog signal output (4-20mA), instantaneous flow (mass) temperature additional damping 0-99.99 (standard 1.0 seconds)
* When communicating via the terminal block, only ③ is valid.
* ①②② may be 3-wire type, but in this case, the power circuit will not be isolated.
※ ①In case of transmission distance of 1KHZ, max. 100m, max. 1km at 100HZ

Voltage pulse [0]: 1.5V or less, [1]: 15V or more, output impedance 2.2k.
Open collector circuit pulse output (min.10V-max.30V, 50mADC FS: 0.1-10000HZ

Analog signal output

4-20mADC(最大负载600Ω）

Instantaneous flow (mass), 2 outputs in temperature with additional damping: 0-200 seconds

Status output

NO

Open collector circuit output (normal: ON, abnormal: OFF) error, choose one of the inflow direction and Hi / Low alarm。

Drive voltage output

NO

DC voltage output (for inspection)