QBY-50 cast iron pneumatic diaphragm pump, mud pump, sewage
Promulgator
：wangshan Time：2018-11-14
QBY-50 cast iron pneumatic diaphragm pump, mud pump, sewage pump, thick pulp pump, glue pump. QBY pneumatic diaphragm pump can not only pump flowing liquid, but also transport some medium which is not easy to flow. It has many advantages of self-priming pump, submersible pump, shielding pump, mud pump and impurity pump. 1. No irrigation is required. The suction range is as high as 5m. and the head reaches 70m.. The outlet pressure is more than 6bar. 2, flow is spacious, through good performance. Allow particle diameter of 10mm. Pumping mud and impurity inch, wear little to the pump. 3, head and flow can be stepless adjustment through air valve opening (barometric adjustment between 1 and 7 bar): 4. The pump has no rotating parts, no shaft seal, and the medium pumped by the diaphragm J | is completely separated from the moving parts of the pump and the medium of the workpiece. The medium conveyed will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety. 5. No need to use electricity. It is safe and reliable to use in inflammable and explosive places. 6. QBY pneumatic diaphragm pump can be immersed in medium: 7. QBY pneumatic diaphragm pump is easy to use, reliable to operate, and only needs to simply open and close the gas valve. Even if it operates without medium for a long time due to unexpected circumstances or stops suddenly, the pump will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance, and when the load returns to normal, it will also be damaged. It can start automatically. 8. QBY pneumatic diaphragm pump has simple structure and few vulnerable parts. It has simple structure, convenient installation and maintenance. The medium conveyed by the pump does not touch the valve, connecting rod and other moving parts. Unlike other types of pumps, the performance of the pump decreases gradually due to the wear and tear of the rotor, piston, gear and blade. 9, QBY pneumatic diaphragm pump can transport more viscous liquid (viscosity below 10 thousand CPS): 10. QBY pneumatic diaphragm pump does not need oil lubrication, even if idle. It has no effect on the pump, which is the characteristics of the pump. Advantage QBY pneumatic diaphragm pump uses compressed air as power source. It can absorb all kinds of corrosive liquids, liquids with particles, liquids with high viscosity, volatility, flammability and toxicity, especially for flammable and explosive fields. Technical parameters of pneumatic diaphragm pump Traffic: 0-30m3/h; Lift: 0-50m; Caliber: 10-100mm; Temperature: -15-+120 C; Pressure: 0.1-0.7MPa; Self priming height: 5-7m.
