YLSB series of vertical slurry pumps (sand pump) is currently widely used in environmental protection, new building materials, coal, municipal engineering, power generation, coal coking plants, oil refineries, steel mills, mining, paper, cement, food factory , plus gas concrete, printing and dyeing industries pumping dope, heavy oil, diesel oil, dirty fluids, mud, mortar, sand flow and urban sewage sludge flow channel, as well as coal, ash-containing liquid. Fluid can also be used as chemical and pharmaceutical industry pumping silt containing slag material and corrosive liquids. Another major aspect of oil drilling and drilling solids control equipment (such as: centrifuges, desander, in addition to mud, whirlpool with pulp devices, etc.) supporting the use, can also be used as centrifuges for pump use.

                                                        Under YLSB series liquid pump technology parameters

model	Flow m³ / h	Speed r / min	Head m	effectiveness%	Power kW
LSB5×4J -45	200	1480	22	58	45
LS5×4J -37	160	1480	18	58	37
LSB5×4J -30	160	1480	15	58	30
LSB4×3J -22	150	1480	15	58	22
LSB3×2J-11	70	1480	18	64	11
LSB3×2J-7.5	60	1480	15	63	7.5
LSB3×2J-5.5	50	1480	12.5	62	5.5
LSB3×2J-4	50	1480	8	60	4
LSB3×2J-3	30	1480	11	63	3

Under YLSB series liquid pump technology parameters
    1.YLSB series of vertical sand pump, the use of advanced sealing structure, selection of wear-resistant material flow components, long life, light weight, easy to install.
      2.YLSB series vertical submerged sand pump is a vertical single-stage single-suction cantilever centrifugal pump structure. The impeller is semi-open impeller, the impeller is provided at the suction side extending stirring impeller. Vertical motor is installed on motor base, connected by coupling with the pump.
      3.YLSB series of vertical sand pump submerged parts of the shaft, there is sufficient rigidity between the impeller, the pump has no bearings, shaft seal is not used, the transmission medium may contain a greater concentration of solid particles. The length of the pump is inserted under the liquid between 800mm ~ 2500mm, if desired, be equipped with a suction pipe.

Next:Принадлежность ролика H7UB.118P
Previous:Spray pump