000-12592-001 Navico 10KW radar processor
delivery time：in stock
Radar processor 6kW, 10kW and 25kW: Connections
There are four interface connectors on the front of the radar processor, two L.E.D plus a chassis
ground.
The Navico radar processor can be connected to any of the following display heads (please refer
to the chapter relevant to you display head)
• Simrad NX40 NX45,
• Simrad GB40
• Northstar 8000i,
• Northstar 6100, 6000i
• Northstar M84, M121
| Radar processor interface connectors | ||
| Key | Connector function | Connects to... |
| A | LED (Ethernet) |
Displays status of the Ethernet network connection |
| B |
Network: Ethernet communications for Simrad GB40 and Northstar 8000i |
GB40 / 8000i network, using Navico network cables (NS00481x). 0.5 m, 2 m, 5 m and 10 m available |
| C | Power (+ve and -ve) |
Ship's power 6kw 12-24 V DC: 10kw and 25kw 24 V DC only |
| D | LED Power | Displays power status |
| E |
NMEA / Coms: Data communications for: Simrad NX40/45 Northstar 6000i, 6100i, Northstar M84 and M121 systems (6kW only) NMEA communications for compass input |
Simrad NX40/45, Northstar 84/121 use the communication cable in the radar connection kit (AA002461) 6000i or 6100i display unit, using radar communications cable (NS003107) 6000i, 6100i, M84, M121 or 8000i remote power signals, relay or ignition; cable not supplied SimNet heading via AT10HD (24006694) for GB40 Systems NMEA0183 compliant compass |
| F | Scanner communications | Scanner, using the interconnection cable |
| G | Grounding point | Vessel's ground using ground wire |
