| DN | 25 | |||||||
| Working pressure | (MPa) | 31.5 | ||||||
| Maximum flow | (L/min) | 210 | ||||||
| Hystersis | (%) | <5 | ||||||
| Repeatability | (%) | <1 | ||||||
| Rated current | (mA) | 800 | ||||||
| Filtration accurancy | ≤20 | |||||||
| Hydraulic fluid | Mineral oil;phosphate-ester | |||||||
| Viscosity | (mm²/s) | 2.8~100 | ||||||
| Fluid temp | (℃) | -20~70 | ||||||
| Cleanliness |
Filter is recommended for the highest fluid pollution degree;the lowest specific filtration resistance according to ISO 4406(c)20/18/15. |
|||||||
| DN | A | B | C | D | E | Fixing screw |
| BCL-25 | 85 | 40 | 80 | 166 | 168.5 | 4M8 |
| BCL-32 | 100 | 50 | 80 | 166 | 177 | 4M16 |
| BCL-40 | 125 | 60 | 80 | 166 | 188.5 | 4M20 |
| BCL-50 | 140 | 68 | 80 | 166 | 196 | 4M20 |
| DN | A | B | C | D | E | F | G | L | M | N | P | R | S |
| BCL-25 | 4 | 13 | 29 | 58 | 62 | 58 | 29 | 85 | M12 | 6 | 6 | 30 | 8 |
| BCL-32 | 6 | 18 | 35 | 70 | 76 | 70 | 35 | 102 | M16 | 6 | 8 | 38 | 8 |
| BCL-40 | 7.5 | 19.5 | 42.5 | 85 | 92.5 | 85 | 42.5 | 125 | M20 | 6 | 10 | 46 | 8 |
| BCL-50 | 8 | 20 | 50 | 100 | 108 | 100 | 50 | 140 | M20 | 8 | 10 | 46 | 8 |
| 通径 | d1 | d2 | d3 | d4 | L1 | L2 | L3 | L4 | L5 | L6 | L7 | U | W |
| BCL-25 | 45 | 34 | 25 | 27 | 58 | 72 | 70 | 57 | 30 | 2.5 | 2.5 | 0.03 | 0.05 |
| BCL-32 | 60 | 45 | 32 | 38.5 | 70 | 85 | 83 | 68.5 | 30 | 2.5 | 2.5 | 0.03 | 0.1 |
| BCL-40 | 75 | 55 | 40 | 54.5 | 87 | 105 | 102 | 84.5 | 30 | 3 | 3 | 0.05 | 0.1 |
| BCL-50 | 90 | 68 | 50 | 62.5 | 100 | 122 | 117 | 97.5 | 35 | 3 | 3 | 0.05 | 0.1 |
