PRO ECO3 240W 24V 10A Weidmüller Power Converter
delivery time：in stock
General ordering data
Type PRO ECO3 240W 24V 10A
Order No. 1469540000
Version
Power supply, switch-mode power supply
unit, 24 V
GTIN (EAN) 4050118275759
Qty. 1 pc(s).
Dimensions and weights
Width 60 mm
Width (inches) 2.362 inch
Height 125 mm
Height (inches) 4.921 inch
Depth 100 mm
Depth (inches) 3.937 inch
Net weight 962 g
Temperatures
Operating temperature -25 °C...70 °C
Storage temperature -40 °C...85 °C
Input
AC current consumption
0.6 A @ 3 x 500 V AC / 0.8 A @ 3 x 400 V
AC
AC input voltage range 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V
AC
Connection system Screw connection
DC current consumption 0.4 A @ 800 V DC / 0.7 A @ 450 V DC
DC input voltage range
450...800 V DC (max. 500 V DC acc. to
UL508)
Frequency range AC 47...63 Hz
Input frequency 47...63 Hz
Input fuse (internal) Yes
Inrush current max. 50 A
Rated input voltage 3 x 400...3 x 500 V AC (wide-range input)
Recommended back-up fuse
2 A / DI, safety fuse
2...3 A, Char. C, circuit breaker
output
Capacitive load unrestricted
Connection system Screw connection
Continuous output current @ URated 10 A @ 55 °C, 7.5 A @ 70 °C
Output power 240 W
Output voltage 24 V
Output voltage 22...28 V (adjustable via potentiometer)
Overload protection Yes
Parallel connection option yes, max. 5
Protection against inverse voltage Yes
Ramp-up time ≤ 100 ms
Rated (nominal) output current @ UNom 10 A @ 55 °C
Rated output voltage 24 V DC ± 1 %
Residual ripple, breaking spikes < 50 mVSS @ 24 V DC, IN
General data
AC failure bridging time @ INom > 40 ms @ 3 x 500 V AC / > 20 ms @ 3 x
400 V AC
Degree of efficiency 88%
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
Indication
LED green (Uoutput > 21.6 V DC), LED
yellow (Ioutput > 90% IRated typ. ), LED red
(overload, overtemperature, short-circuit,
U
output < 20.4 V DC)
MTBF > 500,000 h acc. to IEC 1709 (SN29500
Max. perm. air humidity (operational) 5 %…95 % RH
Mounting position, installation notice on terminal rail TS 35
Operating temperature -25 °C...70 °C
Power factor (approx.)
> 0.55 @ 3 x 500 V AC / > 0.65 @ 3 x 400
V AC
Power loss, idling 6 W
Power loss, nominal load 24 W
Protection against over-heating Yes
Protection against reverse voltages from
the load
30…35 V DC
Protection degree IP20
Short-circuit protection Yes
EMC / shock / vibration
Limiting of mains voltage harmonic
currents
in accordance with EN 61000-3-2
Noise emission acc. to EN55022 Class B
Vibration resistance IEC 60068-2-6 1 g according to EN50178
Interference immunity test acc. to
EN 61000-4-2 (ESD), EN 61000-4-3 (RS),
EN 61000-4-4 (burst), EN 61000-4-5
(surge), EN 61000-4-6 (conducted),
EN61000-4-8 (Fields), EN61000-4-11
(Dips)
Shock resistance IEC 60068-2-27 15 g In all directions
Insulation coordination
Class of protection I, with PE connection
Insulation voltage input / earth 2 kV
Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 3 kV
Pollution severity 2
Electrical safety (applied standards)
Electrical machine equipment Acc. to EN60204
For use with electronic equipment Acc. to EN50178 / VDE0160
Protection against dangerous shock
currents
Acc. to VDE0106-101
Protective separation / protection against
electrical shock
VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage SELV acc. to EN60950, PELV acc. to
EN60204
Safety transformers for switch-mode power
supplies
nach EN61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max. 12
Conductor cross-section, AWG/kcmil , min. 26
Conductor cross-section, flexible , min. 0.5 mm²
Conductor cross-section, rigid , max. 6 mm²
Conductor cross-section, rigid , min. 0.5 mm²
Connection system Screw connection
Number of terminals 4 for L1/L2/L3/PE
Tightening torque, max. 0.6 Nm
Tightening torque, min. 0.5 Nm
Wire connection cross section, flexible
(input), max.
2.5 mm²
Connection data (output)
Conductor cross-section, AWG/kcmil , max. 12
Conductor cross-section, AWG/kcmil , min. 26
Conductor cross-section, flexible , max. 2.5 mm²
Conductor cross-section, flexible , min. 0.5 mm²
Conductor cross-section, rigid , max. 6 mm²
Conductor cross-section, rigid , min. 0.5 mm²
Connection system Screw connection
Number of terminals 6 (++,--,13,14)
Tightening torque, max. 0.6 Nm
Tightening torque, min. 0.5 Nm
Signalling
Contact load (NO contact) max. 30 V DC / 1 A
Floating contact Yes
Relay on/off
Output voltage >21.6 V DC/ <20.4 V DC,
Overload
