HCM（YL）
YG2A14-100UB3XLEAX
Delivery time：4 weeks
| Accessory group | Plug connectors and cables | ||||||||||
| Accessory family | Connecting cables | ||||||||||
| Connection type head A | Female connector, M12, 4-pin, angled, A-coded | ||||||||||
| Connection type head B | Flying leads | ||||||||||
| Locking plug connector | Screw connection | ||||||||||
| Connector material | TPU | ||||||||||
| Connector color | Black | ||||||||||
| Locking nut material | Zinc die-cast, nickel-plated | ||||||||||
| Seal material | FKM | ||||||||||
| Tightening torque | 0.6 Nm | ||||||||||
| Width across flats | 13 | ||||||||||
| Cable | 10 m, 4-wire, PUR, halogen-free | ||||||||||
| Jacket material | PUR, halogen-free | ||||||||||
| Jacket color | Black | ||||||||||
| Cable diameter | 4.5 mm | ||||||||||
| Conductor cross-section | 0.34 mm² | ||||||||||
| Shielding | Unshielded | ||||||||||
|
|||||||||||
| Bending cycles | 10,000,000 | ||||||||||
| Nominal voltage, cable | 300 V AC | ||||||||||
| Test voltage, cable | 2,500 V AC | ||||||||||
|
|||||||||||
| Rated impulse voltage | 2.5 kV | ||||||||||
| Current loading | 4 A | ||||||||||
| Traversing speed | 3 m/s | ||||||||||
| Travelling distance | 10 m | ||||||||||
| Acceleration | ≤ 10 m/s² | ||||||||||
| Signal type | Sensor/actuator cable | ||||||||||
| Torsion force | 180° / 1 m | ||||||||||
| Torsion cycles | 2,000,000 | ||||||||||
| Cycles per minutes | 35 | ||||||||||
| Application |
Zones with oils and lubricants Drag chain operation Robot |
||||||||||
| Authorizations |
CE UL |
||||||||||
| UL File No. | E335179 | ||||||||||
| Enclosure rating | IP65 / IP66K / IP67 | ||||||||||
|
|||||||||||
| Contamination rating | 3 | ||||||||||
| Insulation resistance | 100 MΩ | ||||||||||
| Overvoltage category | III | ||||||||||
| Specific insulation resistance | 30 mΩ | ||||||||||
| Thermal resistance, piping | Flame retardant according to UL 1581, horizontal flame test/CSA FT2 / IEC 60332-1, IEC 60332-2-2 | ||||||||||
