HCM（YMX）
WTF11-2P2431
Delivery time：8-12 weeks
Product features
Sensor principle/detection principle Diffuse reflection photoelectric sensor, foreground suppression
Dimensions (W x H x D) 15.6 mm x 48.5 mm x 42 mm
Shell shape (beam outlet) square
Maximum switching distance 35 mm 350 mm 1)
Sensing distance 35 mm 350 mm
Light source type visible red light
Light source LED 2)
Spot size (distance) Ø 6 mm (200 mm)
Shaft length 640 nm
Set potentiometer, 5 turns
1) Scanning object with 90% reflectivity (refers to standard white according to DIN 5033)
2) Average service life: 100000 hours, TU=+25 ° C
Mechanical/electronic parameters
Supply voltage 10 V DC 30 V DC 1)
Residual ripple ≤ 5 Vss
2)
1) Critical value under grid environment for short circuit protection: max. 8 A
2) Do not exceed or fall below the UV tolerance
3) No load
4) Signal transmission time (under resistance load)
5) When the light and dark contrast ratio is 1:1
6) A=UV interface (anti-polarity protection measures have been taken)
7) C=Suppress interference pulse
8) D=output terminal of anti-overload current and short-circuit protection
Current consumption 30 mA 3)
Switching value output PNP
Switch function compensation
Switch type light/dark switching
Signal voltage PNP high level/low level Uv - 2,5 V/ca. 0 V
Output current Imax 100 mA
Response time ≤ 2.5 ms 4)
Switching frequency 200 Hz 5)
Connection type plug, M12, 4-pin
Protection circuit A 6)
C 7)
D 8)
Protection class II
Weight 120 g
Shell material plastic, ABS
Material, optical element plastic, PMMA
Enclosure protection grade IP66
IP67
IP69K
Operating ambient temperature – 30 ° C+ 60 °C
Storage ambient temperature – 40 ° C+ 75 °C
UL Document No. NRKH.E181493&NRKH7.E181493
1) Critical value under grid environment for short circuit protection: max. 8 A
2) Do not exceed or fall below the UV tolerance
3) No load
4) Signal transmission time (under resistance load)
5) When the light and dark contrast ratio is 1:1
6) A=UV interface (anti-polarity protection measures have been taken)
7) C=Suppress interference pulse
8) D=output terminal of anti-overload current and short-circuit protection
