BC-200A pump counter
Delivery time 3-5days
The pump counter is used to measure the number of pump strokes of the reciprocating mud pump and the number of pump strokes per minute (ie, the frequency of the pump stroke) to provide the driller with accurate loading and speed of the wellbore slurry. It is an essential instrument in the drilling process. The JY-BC-200A pumping counter is improved on the basis of the JY-BC-100 pumping counter and is an upgraded version of the JY-BC-100 pumping counter. It adds one signal input channel to JY-BC-100, and increases the counting and accumulating of single channel pumping, the accumulation of total pump strokes, data memory during shutdown, etc., and the operation is more convenient, simple and reliable. . We use a fully sealed structure on the housing, the waterproof connector is used for the signal connector, and the waterproof button is used for the button, so the JY-BC-200A pump counter has good moisture and waterproof performance. In the water resistance test with a water depth of 1 m and 12 hours, there is no water inflow inside the JY-BC-200A pump counter. Since the overall power consumption of the JY-BC-200A pumping counter is about 150uA and the sensor signal current is about 5uA, the JY-BC-200A pumping counter is inherently explosion-proof, which is intrinsically safe.
Features:
The number of pump strokes of pump 1, pump 2 and pump 3 is measured and independently displayed.
Measure and switch the pump frequency of pump 1, pump 2 and pump 3, which can be switched via the “Select” button on the panel.
Total pump strokes (sum of pump strokes for pump 1, pump 2, and pump 3).
Memory of measured data (in the case of not replacing the battery).
Performance parameters:
Range: Pump strokes of pump 1, pump 2 and pump 3: 0 ~ 19999
Total (sum of pump strokes of pump 1, pump 2 and pump 3): 0 to 99999
Pumping frequency: 0~999
Signal input channel: 3 channels
Ambient temperature: -30 ° C ~ 70 ° C
Power supply: ER26500 3.6V industrial lithium battery, two sections in parallel.
